Add a mention to 'pve-efiboot-tool refresh' in places where 'update-initramfs' is mentioned.
Signed-off-by: Stefan Reiter <s.rei...@proxmox.com> --- local-zfs.adoc | 5 ++++- qm-pci-passthrough.adoc | 18 +++++++++++------- system-booting.adoc | 6 +++--- 3 files changed, 18 insertions(+), 11 deletions(-) diff --git a/local-zfs.adoc b/local-zfs.adoc index af330e1..dd447b8 100644 --- a/local-zfs.adoc +++ b/local-zfs.adoc @@ -309,7 +309,10 @@ This example setting limits the usage to 8GB. If your root file system is ZFS you must update your initramfs every time this value changes: - update-initramfs -u + update-initramfs -u -k all + +If using `systemd-boot` you also need to +xref:sysboot_systemd_boot_refresh[sync the new initramfs to the bootable partitions] ==== diff --git a/qm-pci-passthrough.adoc b/qm-pci-passthrough.adoc index d9b842a..9b5c79c 100644 --- a/qm-pci-passthrough.adoc +++ b/qm-pci-passthrough.adoc @@ -178,8 +178,9 @@ for passthrough, with in a .conf file in */etc/modprobe.d/*. For both methods you need to -xref:qm_pci_passthrough_update_initramfs[update the `initramfs`] again and -reboot after that. +xref:qm_pci_passthrough_update_initramfs[update the `initramfs`] (and +xref:sysboot_systemd_boot_refresh[sync the new initramfs to the bootable partitions] +if necessary) again and reboot after that. [[qm_pci_passthrough_vm_config]] VM Configuration @@ -250,15 +251,17 @@ Host Configuration Generally, there are two methods for enabling virtual functions on a device. -* sometimes there is an option for the driver module e.g. for some +* sometimes there is an option for the driver module, e.g. for some Intel drivers + ---- max_vfs=4 ---- + -which could be put file with '.conf' ending under */etc/modprobe.d/*. -(Do not forget to update your initramfs after that) +can be put in a file with '.conf' ending under */etc/modprobe.d/*. +Do not forget to xref:qm_pci_passthrough_update_initramfs[update the `initramfs`] +(including xref:sysboot_systemd_boot_refresh[syncing the new initramfs to the bootable partitions] +if necessary) after that. + Please refer to your driver module documentation for the exact parameters and options. @@ -323,8 +326,9 @@ xref:sysboot_edit_kernel_cmdline[Kernel commandline] and add the following param ---- After that remember to -xref:qm_pci_passthrough_update_initramfs[update the `initramfs`], -and reboot your host. +xref:qm_pci_passthrough_update_initramfs[update the `initramfs`] (and +xref:sysboot_systemd_boot_refresh[sync the new initramfs to the bootable partitions] +if necessary), and reboot your host. VM Configuration ^^^^^^^^^^^^^^^^ diff --git a/system-booting.adoc b/system-booting.adoc index fefc963..3c66116 100644 --- a/system-booting.adoc +++ b/system-booting.adoc @@ -198,7 +198,7 @@ Editing the kernel commandline ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can modify the kernel commandline in the following places, depending on the -bootloarder used: +bootloader used: .Grub @@ -209,6 +209,6 @@ The kernel commandline needs to be placed in the variable .Systemd-boot -The kernel commandline needs to be placed as line in `/etc/kernel/cmdline` -Running `/etc/kernel/postinst.d/zz-pve-efiboot` sets it as `option` line for +The kernel commandline needs to be placed in `/etc/kernel/cmdline`. +Running `pve-efiboot-tool refresh` sets it as the `option` line for all config files in `loader/entries/proxmox-*.conf`. -- 2.20.1 _______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
