Am 2/14/19 um 4:01 PM schrieb Oguz Bektas: > Signed-off-by: Oguz Bektas <[email protected]> > --- > pveceph.adoc | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/pveceph.adoc b/pveceph.adoc > index c90a92e..3af8431 100644 > --- a/pveceph.adoc > +++ b/pveceph.adoc > @@ -211,7 +211,7 @@ This is the default when creating OSDs in Ceph luminous. > pveceph createosd /dev/sd[X] > ---- > > -NOTE: In order to select a disk in the GUI, to be more failsafe, the disk > needs > +NOTE: In order to select a disk in the GUI, to be more fail-safe, the disk > needs > to have a GPT footnoteref:[GPT, GPT partition table > https://en.wikipedia.org/wiki/GUID_Partition_Table] partition table. You can > create this with `gdisk /dev/sd(x)`. If there is no GPT, you cannot select > the > @@ -227,7 +227,7 @@ pveceph createosd /dev/sd[X] -journal_dev /dev/sd[Y] > ---- > > NOTE: The DB stores BlueStore’s internal metadata and the WAL is BlueStore’s > -internal journal or write-ahead log. It is recommended to use a fast SSDs or > +internal journal or write-ahead log. It is recommended to use a fast SSD or > NVRAM for better performance. > > > @@ -235,7 +235,7 @@ Ceph Filestore > ~~~~~~~~~~~~~ > Till Ceph luminous, Filestore was used as storage type for Ceph OSDs. It can > still be used and might give better performance in small setups, when backed > by > -a NVMe SSD or similar. > +an NVMe SSD or similar. > > [source,bash] > ---- >
applied _______________________________________________ pve-devel mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
