On 2026-03-10 13:08, Gabriel Goller wrote:
> Implements bgp routing configuration (rust types and templates)
> including routers, neighbor groups, address families (IPv4/IPv6 unicast,
> L2VPN EVPN), VRFs, route redistribution, and prefix lists.
>
> Co-authored-by: Stefan Hanreich <[email protected]>
> Signed-off-by: Gabriel Goller <[email protected]>
> ---
[..]
> diff --git a/proxmox-frr-templates/templates/bgpd.jinja
> b/proxmox-frr-templates/templates/bgpd.jinja
> new file mode 100644
> index 000000000000..cdd0a50abf8c
> --- /dev/null
> +++ b/proxmox-frr-templates/templates/bgpd.jinja
> @@ -0,0 +1,35 @@
> +{% from "bgp_router.jinja" import bgp_router %}
> +{% for vrf_name, vrf in bgp.vrfs|items %}
> +!
> +vrf {{ vrf_name }}
> +{% if vrf.vni %}
^
> + vni {{ vrf.vni }}
I don't we do that currently, but it is possible to have routes in a VRF
but no VNI, shouldn't be a problem for us, just wanted to note it
> +{% for ip_route in vrf.ip_routes %}
> +{% if ip_route.vrf %}
> + {{ "ipv6" if ip_route.is_ipv6 else "ip" }} route {{ ip_route.prefix }} {{
> ip_route.via }} {{ ip_route.vrf }}
> +{% else %}
> + {{ "ipv6" if ip_route.is_ipv6 else "ip" }} route {{ ip_route.prefix }} {{
> ip_route.via }}
> +{% endif %}
> +{% endfor %}
> +{% endif %}
^
> +{% for line in vrf.custom_frr_config %}
> +{{ line }}
> +{% endfor %}
> +exit-vrf
> +{% endfor %}
> +{% for vrf_name, router_config in bgp.vrf_router|items %}
> +!
> +{% if vrf_name == "default" %}
> +router bgp {{ router_config.asn }}
> +{% else %}
> +router bgp {{ router_config.asn }} vrf {{ vrf_name }}
> +{% endif %}
> +{{ bgp_router(router_config) -}}
> +exit
> +{% endfor %}
> +{% for view_id, router_config in bgp.view_router|items %}
> +!
> +router bgp {{ router_config.asn }} view {{ view_id }}
> +{{ bgp_router(router_config) -}}
> +exit
> +{% endfor %}
[..]
