Hi Stelios, On 11/11/2025 00:25, Stelios Vailakakis wrote: >> So if I understand correctly, after applying only your hostname patch on >> top of an up-to-date libpve-storage-perl, you are still seeing the >> "connection lost" entries on the iSCSI target? Can you double-check the >> version of libpve-storage-perl (e.g. using `pveversion -v | grep >> libpve-storage`) on top of which you applied your hostname patch? Could >> you post the (anonymized) output of `iscsiadm -m node` and `iscsiadm -m >> session` on nodes 1-4 and 5? > > For clarity, the connection lost entries no longer occur after applying my > patch on all previously mentioned PVE stacks as well as within 9.01 which I > recently upgraded to.
Since your patch for allowing hostnames in $ISCSI_TARGET_RE was already applied for PVE9.0 [1], your initial patch doesn't apply cleanly anymore on top of current pve-storage. Just so we are on the same page regarding the patch we're discussing, could you send the patch you now applied on your PVE9 node, rebased on current pve-storage? > > Current environment is proxmox1 - patched, proxmox2 - default. I will show > icsiadm output on a "good" proxmox1 vs "bad" proxmox2. > > 12345 is a placeholder for domain, IP addresses irrelevant and made up. I > will leave my proxmox2 node unpatched in case we need any more information. > > #Version sanity check > root@proxmox1:~# pveversion -v | grep 'libpve-storage\|pve-manager' > pve-manager: 9.0.11 (running version: 9.0.11/3bf5476b8a4699e2) > libpve-storage-perl: 9.0.13 > > root@proxmox2:~# pveversion -v | grep 'libpve-storage\|pve-manager' > pve-manager: 9.0.11 (running version: 9.0.11/3bf5476b8a4699e2) > libpve-storage-perl: 9.0.13 > > > #proxmox1 iscsiadm > root@proxmox1:~# iscsiadm -m node > nas.12345.com:3260,4294967295 iqn.2024-01.com.12345.vm-stor > nas.12345.com:3260,4294967295 iqn.2025-06.com.12345.ssd-vm-stor > root@proxmox1:~# iscsiadm -m session > tcp: [1] 192.168.1.10:3260,1 iqn.2024-01.com.12345.vm-stor (non-flash) > tcp: [2] 192.168.1.10:3260,1 iqn.2025-06.com.12345.ssd-vm-stor (non-flash) > > #proxmox2 icsiadm > root@proxmox2:~# iscsiadm -m node > nas.12345.com:3260,4294967295 iqn.2024-01.com.12345.vm-stor > nas.12345.com:3260,4294967295 iqn.2025-06.com.12345.ssd-vm-stor > root@proxmox2:~# iscsiadm -m session > tcp: [1] 192.168.1.10:3260,1 iqn.2025-06.com.12345.ssd-vm-stor (non-flash) > tcp: [2] 192.168.1.10:3260,1 iqn.2024-01.com.12345.vm-stor (non-flash) > I don't currently have a test setup where the target advertises a portal via its hostname, hence my question: Do I understand correctly that `iscsiadm -m node` shows the hostname, and `iscsiadm -m session` shows the IP the hostname resolves to? And nas.12345.com resolves to 192.168.1.10? Best wishes, Friedrich [1] https://lore.proxmox.com/all/[email protected]/ [2] https://pve.proxmox.com/wiki/Developer_Documentation _______________________________________________ pve-devel mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
