I tried to test this by hotplugging a USB device, but that failed with
`failed to open '/proc/130797/root/dev/bus/usb/002/001': No such file or
directory`. It does work when the container is shut down. Or am I
missing something here when adding the USB device? I added a comment
regarding this inline containing what I think is the culprit.
I used the change I proposed below (make_path) to continue my testing.
The device shows up within in the container and can be read from. Did
not notice anything unexpected.
On 4/23/25 14:56, Filip Schauer wrote:
> This only includes adding devices to a running container. Removing or
> editing existing devices is still not implemented.
>
> Signed-off-by: Filip Schauer <f.scha...@proxmox.com>
> ---
> src/PVE/LXC.pm | 74 ++++++++++++++++++++++++++++++++++++++++++-
> src/PVE/LXC/Config.pm | 19 +++++++++++
> 2 files changed, 92 insertions(+), 1 deletion(-)
>
> diff --git a/src/PVE/LXC.pm b/src/PVE/LXC.pm
> index d985b88..0c8c2e9 100644
> --- a/src/PVE/LXC.pm
> +++ b/src/PVE/LXC.pm
> @@ -5,7 +5,7 @@ use warnings;
>
> use Cwd qw();
> use Errno qw(ELOOP ENOTDIR EROFS ECONNREFUSED EEXIST);
> -use Fcntl qw(O_RDONLY O_WRONLY O_NOFOLLOW O_DIRECTORY :mode);
> +use Fcntl qw(O_RDONLY O_WRONLY O_NOFOLLOW O_DIRECTORY O_CREAT :mode);
> use File::Basename;
> use File::Path;
> use File::Spec;
> @@ -2065,6 +2065,78 @@ my $enter_mnt_ns_and_change_aa_profile = sub {
> or die "failed to change apparmor profile (close() failed): $!\n";
> };
>
> +sub device_passthrough_hotplug :prototype($$$) {
> + my ($vmid, $conf, $dev) = @_;
> +
> + my ($mode, $rdev) = (stat($dev->{path}))[2, 6];
> +
> + die "Could not get mode or device ID of $dev->{path}\n"
> + if (!defined($mode) || !defined($rdev));
> +
> + # We do the rest in a fork with an unshared mount namespace:
> + # -) change our apparmor profile to 'pve-container-mounthotplug', which
> is '/usr/bin/lxc-start'
> + # with move_mount privileges on every mount.
> + # -) create the device node, then grab it, create a file to bind mount
> the device node onto in
> + # the container, switch to the container mount namespace, and
> move_mount the device node.
> +
> + PVE::Tools::run_fork(sub {
> + # Pin the container pid longer, we also need to get its monitor/parent:
> + my ($ct_pid, $ct_pidfd) = open_lxc_pid($vmid)
> + or die "failed to open pidfd of container $vmid\'s init process\n";
> +
> + my ($monitor_pid, $monitor_pidfd) = open_ppid($ct_pid)
> + or die "failed to open pidfd of container $vmid\'s monitor
> process\n";
> +
> + my $ct_mnt_ns = $get_container_namespace->($vmid, $ct_pid, 'mnt');
> + my $ct_user_ns = $get_container_namespace->($vmid, $ct_pid, 'user');
> + my $monitor_mnt_ns = $get_container_namespace->($vmid, $monitor_pid,
> 'mnt');
> +
> + # Enter monitor mount namespace and switch to
> 'pve-container-mounthotplug' apparmor profile.
> + $enter_mnt_ns_and_change_aa_profile->($monitor_mnt_ns,
> "pve-container-mounthotplug", undef);
> +
> + my $id_map = (PVE::LXC::parse_id_maps($conf))[0];
> + my $passthrough_device_path = create_passthrough_device_node(
> + "/var/lib/lxc/$vmid/passthrough", $dev, $mode, $rdev, $id_map);
I understand that this path is guaranteed to exist because it is created
as part of the prestart hook, but maybe this could also be moved to a
helper function and called before calling create_passthrough_device_node
as well, just to be sure. Just a suggestion.
> +
> + my $srcfh = PVE::Tools::open_tree(&AT_FDCWD, $passthrough_device_path,
> &OPEN_TREE_CLOEXEC | &OPEN_TREE_CLONE)
> + or die "open_tree() on passthrough device node failed: $!\n";
> +
> + if ($conf->{unprivileged}) {
> + PVE::Tools::setns(fileno($ct_user_ns), PVE::Tools::CLONE_NEWUSER)
> + or die "failed to enter user namespace of container $vmid:
> $!\n";
> +
> + POSIX::setuid(0);
> + POSIX::setgid(0);
> + }
> +
> + # Create a regular file in the container to bind mount the device node
> onto.
> + sysopen(my $dstfh, "/proc/$ct_pid/root$dev->{path}", O_CREAT)
> + or die "failed to open '/proc/$ct_pid/root$dev->{path}': $!\n";
While this does create the file, it does not create the directory.
Calling File::Path::make_path(dirname("/proc/$ct_pid/root$dev->{path}"))
directly before the sysopen call makes this behave as I would expect it
to and then the hotplug works.
> +
> + # Enter the container mount namespace
> + PVE::Tools::setns(fileno($ct_mnt_ns), PVE::Tools::CLONE_NEWNS);
> + chdir('/')
> + or die "failed to change root directory within the container's
> mount namespace: $!\n";
> +
> + # Bind mount the device node into the container
> + PVE::Tools::move_mount(fileno($srcfh), '', fileno($dstfh), '',
> &MOVE_MOUNT_F_EMPTY_PATH | &MOVE_MOUNT_T_EMPTY_PATH)
> + or die "move_mount failed: $!\n";
> + });
> +
> + # Allow or deny device access with cgroup2
> + my $major = PVE::Tools::dev_t_major($rdev);
> + my $minor = PVE::Tools::dev_t_minor($rdev);
> + my $device_type = S_ISBLK($mode) ? 'b' : 'c';
> +
> + run_command(["lxc-cgroup", "-n", $vmid, "devices.deny", "$device_type
> $major:$minor w"])
> + if ($dev->{'deny-write'});
> +
> + my $allow_perms = $dev->{'deny-write'} ? 'r' : 'rw';
> + run_command([
> + "lxc-cgroup", "-n", $vmid, "devices.allow", "$device_type $major:$minor
> $allow_perms"
> + ]);
> +}
> +
> sub mountpoint_hotplug :prototype($$$$$) {
> my ($vmid, $conf, $opt, $mp, $storage_cfg) = @_;
>
> diff --git a/src/PVE/LXC/Config.pm b/src/PVE/LXC/Config.pm
> index 555767f..f6795a5 100644
> --- a/src/PVE/LXC/Config.pm
> +++ b/src/PVE/LXC/Config.pm
> @@ -1535,6 +1535,13 @@ sub vmconfig_hotplug_pending {
> $class->apply_pending_mountpoint($vmid, $conf, $opt, $storecfg,
> 1);
> # apply_pending_mountpoint modifies the value if it creates a
> new disk
> $value = $conf->{pending}->{$opt};
> + } elsif ($opt =~ m/^dev(\d+)$/) {
> + if (exists($conf->{$opt})) {
> + die "skip\n"; # don't try to hotplug over existing dev
> + }
> +
> + $class->apply_pending_device_passthrough($vmid, $conf, $opt, 1);
> + $value = $conf->{pending}->{$opt};
> } else {
> die "skip\n"; # skip non-hotpluggable
> }
> @@ -1629,6 +1636,18 @@ my $rescan_volume = sub {
> warn "Could not rescan volume size - $@\n" if $@;
> };
>
> +sub apply_pending_device_passthrough {
> + my ($class, $vmid, $conf, $opt, $running) = @_;
> +
> + my $dev = $class->parse_device($conf->{pending}->{$opt});
> + my $old = $conf->{$opt};
> + if ($running) {
> + die "skip\n" if defined($old); # TODO: editing a device passthrough
> + PVE::LXC::device_passthrough_hotplug($vmid, $conf, $dev);
> + $conf->{pending}->{$opt} = $class->print_device($dev);
> + }
> +}
> +
> sub apply_pending_mountpoint {
> my ($class, $vmid, $conf, $opt, $storecfg, $running) = @_;
>
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
