When creating a new network device from the UI and leaving the MTU field empty, it defaults to 1500. This is inconvenient in cases where the MTU of the bridge is not 1500 and lead to some confusion of users [1]. Containers already inherit the bridge MTU when the field is left empty, so align the behavior of VMs to be more in line with the more convenient behavior of containers.
The common case where this was encountered was with creating network devices on SDN VXLAN vnets. There the default MTU for bridges is 1450, since VXLAN adds some overhead and we automatically subtract that overhead from the default bridge MTU (1500) if no MTU is explicitly set in the zone configuration. Before that users always had to explicitly set the MTU to 1450 or 1 for every network device created, which is error-prone. [1] https://forum.proxmox.com/threads/bug-vxlan-and-mtu.161412 Signed-off-by: Stefan Hanreich <s.hanre...@proxmox.com> --- PVE/QemuServer.pm | 30 ++++++++++++++++-------------- test/cfg2cmd/netdev_vxlan.conf | 7 +++++++ test/cfg2cmd/netdev_vxlan.conf.cmd | 28 ++++++++++++++++++++++++++++ test/run_config2command_tests.pl | 6 ++++++ 4 files changed, 57 insertions(+), 14 deletions(-) create mode 100644 test/cfg2cmd/netdev_vxlan.conf create mode 100644 test/cfg2cmd/netdev_vxlan.conf.cmd diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm index ccdceedc..ad1716d7 100644 --- a/PVE/QemuServer.pm +++ b/PVE/QemuServer.pm @@ -912,7 +912,7 @@ my $net_fmt = { mtu => { type => 'integer', minimum => 1, maximum => 65520, - description => "Force MTU, for VirtIO only. Set to '1' to use the bridge MTU", + description => "Force MTU, for VirtIO only. Setting to '1' or leaving it empty will use the bridge MTU.", optional => 1, }, }; @@ -1596,20 +1596,22 @@ sub print_netdevice_full { $tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex} ; - if (my $mtu = $net->{mtu}) { - if ($net->{model} eq 'virtio' && $net->{bridge}) { - my $bridge_mtu = PVE::Network::read_bridge_mtu($net->{bridge}); - if ($mtu == 1) { - $mtu = $bridge_mtu; - } elsif ($mtu < 576) { - die "netdev $netid: MTU '$mtu' is smaller than the IP minimum MTU '576'\n"; - } elsif ($mtu > $bridge_mtu) { - die "netdev $netid: MTU '$mtu' is bigger than the bridge MTU '$bridge_mtu'\n"; - } - $tmpstr .= ",host_mtu=$mtu"; - } else { - warn "WARN: netdev $netid: ignoring MTU '$mtu', not using VirtIO or no bridge configured.\n"; + my $mtu = $net->{mtu}; + + if ($net->{model} eq 'virtio' && $net->{bridge}) { + my $bridge_mtu = PVE::Network::read_bridge_mtu($net->{bridge}); + + if (!defined($mtu) || $mtu == 1) { + $mtu = $bridge_mtu; + } elsif ($mtu < 576) { + die "netdev $netid: MTU '$mtu' is smaller than the IP minimum MTU '576'\n"; + } elsif ($mtu > $bridge_mtu) { + die "netdev $netid: MTU '$mtu' is bigger than the bridge MTU '$bridge_mtu'\n"; } + + $tmpstr .= ",host_mtu=$mtu" if $mtu != 1500; + } elsif (defined($mtu)) { + warn "WARN: netdev $netid: ignoring MTU '$mtu', not using VirtIO or no bridge configured.\n"; } if ($use_old_bios_files) { diff --git a/test/cfg2cmd/netdev_vxlan.conf b/test/cfg2cmd/netdev_vxlan.conf new file mode 100644 index 00000000..af9e31c7 --- /dev/null +++ b/test/cfg2cmd/netdev_vxlan.conf @@ -0,0 +1,7 @@ +# TEST: Test inheriting the MTU from a bridge with MTU != 1500 +bootdisk: scsi0 +cores: 3 +memory: 768 +name: netdev +net0: virtio=A2:C0:43:77:08:A0,bridge=vxlan_bridge +ostype: l26 diff --git a/test/cfg2cmd/netdev_vxlan.conf.cmd b/test/cfg2cmd/netdev_vxlan.conf.cmd new file mode 100644 index 00000000..7de574a7 --- /dev/null +++ b/test/cfg2cmd/netdev_vxlan.conf.cmd @@ -0,0 +1,28 @@ +/usr/bin/kvm \ + -id 8006 \ + -name 'netdev,debug-threads=on' \ + -no-shutdown \ + -chardev 'socket,id=qmp,path=/var/run/qemu-server/8006.qmp,server=on,wait=off' \ + -mon 'chardev=qmp,mode=control' \ + -chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect-ms=5000' \ + -mon 'chardev=qmp-event,mode=control' \ + -pidfile /var/run/qemu-server/8006.pid \ + -daemonize \ + -smp '3,sockets=1,cores=3,maxcpus=3' \ + -nodefaults \ + -boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \ + -vnc 'unix:/var/run/qemu-server/8006.vnc,password=on' \ + -cpu kvm64,enforce,+kvm_pv_eoi,+kvm_pv_unhalt,+lahf_lm,+sep \ + -m 768 \ + -global 'PIIX4_PM.disable_s3=1' \ + -global 'PIIX4_PM.disable_s4=1' \ + -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \ + -device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' \ + -device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' \ + -device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \ + -device 'VGA,id=vga,bus=pci.0,addr=0x2' \ + -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \ + -iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \ + -netdev 'type=tap,id=net0,ifname=tap8006i0,script=/usr/libexec/qemu-server/pve-bridge,downscript=/usr/libexec/qemu-server/pve-bridgedown,vhost=on' \ + -device 'virtio-net-pci,mac=A2:C0:43:77:08:A0,netdev=net0,bus=pci.0,addr=0x12,id=net0,rx_queue_size=1024,tx_queue_size=256,bootindex=300,host_mtu=1450' \ + -machine 'type=pc+pve1' diff --git a/test/run_config2command_tests.pl b/test/run_config2command_tests.pl index 209122c2..c2dfbd31 100755 --- a/test/run_config2command_tests.pl +++ b/test/run_config2command_tests.pl @@ -316,6 +316,12 @@ my $pve_common_network; $pve_common_network = Test::MockModule->new('PVE::Network'); $pve_common_network->mock( read_bridge_mtu => sub { + my ($bridge_name) = @_; + + if ($bridge_name eq 'vxlan_bridge') { + return 1450; + } + return 1500; }, ); -- 2.39.5 _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
