From: Leo Nunner <l.nun...@proxmox.com>
adds documentation for Cloud-Init for containers. Most of it has been
taken from the VM documentation, since the configuration mostly works
the same. Added a script to extract the cloudinit parameters the same
way it's already done for VMs.
Signed-off-by: Leo Nunner <l.nun...@proxmox.com>
---
Makefile | 1 +
pct-cloud-init.adoc | 114 ++++++++++++++++++++++++++++++++++++++++++++
pct.adoc | 4 ++
3 files changed, 119 insertions(+)
create mode 100644 pct-cloud-init.adoc
diff --git a/Makefile b/Makefile
index f30d77a..24836b8 100644
--- a/Makefile
+++ b/Makefile
@@ -53,6 +53,7 @@ GEN_SCRIPTS= \
gen-pct.conf.5-opts.pl \
gen-pct-network-opts.pl \
gen-pct-mountpoint-opts.pl \
+ gen-pct-cloud-init-opts.pl \
gen-qm.conf.5-opts.pl \
gen-cpu-models.conf.5-opts.pl \
gen-qm-cloud-init-opts.pl \
diff --git a/pct-cloud-init.adoc b/pct-cloud-init.adoc
new file mode 100644
index 0000000..1398e7b
--- /dev/null
+++ b/pct-cloud-init.adoc
@@ -0,0 +1,114 @@
+[[pct_cloud_init]]
+Cloud-Init Support
+------------------
+ifdef::wiki[]
+:pve-toplevel:
+endif::wiki[]
+
+{pve} supports the Cloud-init 'nocloud' format for LXC.
+
+{pve} writes the Cloud-init configuration directly into the container.
+When the 'cienable' option is set to true, the configuration is updated
+directly before before every boot. Each configuration is identified by
+an 'instance id', which Cloud-Init uses to decide whether it should run
+again or not.
+
+Preparing Cloud-Init Templates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The first step is to prepare your container. Any template will suffice.
+Simply install the Cloud-Init packages inside the CT that you want to
+prepare. On Debian/Ubuntu based systems this is as simple as:
+
+----
+apt install cloud-init
+----
+
+WARNING: This command is *not* intended to be executed on the {pve} host, but
+only inside the container.
+
+A simple preparation for a cloud-init capable container could look like this:
+
+----
+# download an image
+pveam download local ubuntu-22.10-standard_22.10-1_amd64.tar.zst
+
+# create a new container
+pct create 9000 local:vztmpl/ubuntu-22.10-standard_22.10-1_amd64.tar.zst \
+ --storage local-lvm --memory 512 \
+ --net0 name=eth0,bridge=vmbr0,ip=dhcp,type=veth
+----
+
+Now, the package can be installed inside the container:
+
+----
+# install the needed packages
+pct start 9000
+pct exec 9000 apt update
+pct exec 9000 apt install cloud-init
+pct stop 9000
+----
+
+Finally, it can be helpful to turn the container into a template, to be able
+to quickly create clones whenever needed.
+
+----
+pct template 9000
+----
+
+Deploying Cloud-Init Templates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A template can easily be deployed by cloning:
+
+----
+pct clone 9000 3000 --hostname ubuntu
+----
+
+Cloud-Init can now be enabled, and will run automatically on the next boot.
+
+----
+pct set 3000 --cienable=1
+----
+
+Custom Cloud-Init Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Cloud-Init integration also allows custom config files to be used instead
+of the automatically generated configs. This is done via the `cicustom`
+option on the command line:
+
+----
+pct set 9000 --cicustom "user=<volume>,meta=<volume>"
+----
+
+The custom config files have to be on a storage that supports snippets and have
+to be available on all nodes the container is going to be migrated to.
Otherwise the
+container won't be able to start.
+For example:
+
+----
+qm set 9000 --cicustom "user=local:snippets/userconfig.yaml"
+----
+
+In contrast to the options for VMs, containers only support custom 'user'
+and 'vendor' scripts, but not 'network'. Network configuration is done through
+the already existing facilities integrated into {pve}. They can all be
specified
+together or mixed and matched however needed.
+The automatically generated config will be used for any section that doesn't
have a
+custom config file specified.
+
+The generated config can be dumped to serve as a base for custom configs:
+
+----
+pct cloudinit dump 9000 user
+----
+
+The same command exists for `meta`.
+
+
+Cloud-Init specific Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+include::pct-cloud-init-opts.adoc[]
+
diff --git a/pct.adoc b/pct.adoc
index 529b72f..de80347 100644
--- a/pct.adoc
+++ b/pct.adoc
@@ -622,6 +622,10 @@ It will be called during various phases of the guests
lifetime. For an example
and documentation see the example script under
`/usr/share/pve-docs/examples/guest-example-hookscript.pl`.
+ifndef::wiki[]
+include::pct-cloud-init.adoc[]
+endif::wiki[]
+
Security Considerations
-----------------------
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
