ICMPv6 has different message types for rejecting traffic. With ICMP we used host-prohibited as rejection type, which doesn't exist in ICMPv6. Add an additional rule for IPv6, so it uses admin-prohibited.
Additionally, add a terminal drop statement in order to prevent any traffic that does not get matched from bypassing the reject chain. Signed-off-by: Stefan Hanreich <s.hanre...@proxmox.com> --- Changes from v1 -> v2: * add a terminal drop statement to prevent any unmatched traffic from bypassing the reject chain * properly match ICMPv6 traffic via l4proto proxmox-firewall/resources/proxmox-firewall.nft | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/proxmox-firewall/resources/proxmox-firewall.nft b/proxmox-firewall/resources/proxmox-firewall.nft index f36bf3b..f60f8b5 100644 --- a/proxmox-firewall/resources/proxmox-firewall.nft +++ b/proxmox-firewall/resources/proxmox-firewall.nft @@ -75,8 +75,10 @@ table inet proxmox-firewall { ip saddr 224.0.0.0/4 drop meta l4proto tcp reject with tcp reset - meta l4proto icmp reject with icmp type port-unreachable + meta l4proto { icmp, ipv6-icmp } reject with icmpx type port-unreachable reject with icmp type host-prohibited + reject with icmpv6 type admin-prohibited + drop } set v4-dc/management { @@ -289,8 +291,10 @@ table bridge proxmox-firewall-guests { ip saddr 224.0.0.0/4 drop meta l4proto tcp reject with tcp reset - meta l4proto icmp reject with icmp type port-unreachable + meta l4proto { icmp, ipv6-icmp } reject with icmpx type port-unreachable reject with icmp type host-prohibited + reject with icmpv6 type admin-prohibited + drop } chain after-vm-in { -- 2.39.2 _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel