Hi Victor, On 06.10.21 10:15, Victor Hooi wrote: > Ah - interesting - as a data-point, this was a new install of Proxmox 7.0-2 > (from the ISO image), and then I ran an apt update, apt dist-upgrade > directly after first boot.
very interesting indeed, I mainly tested on a cluster that was installed with PVE 6.2 and a development VM that was originally a Bullseye pre-release ISO, it worked out OK on both. > > I just did an apt update, apt dist-upgrade again - and there was one > package to update (trousers). > > I am still getting an error with this version: Hmm first I thought that could be the "stop-before-upgrade" of the old, broken version, but that makes not much sense as your error is on a "start". Did you edit `/etc/init.d/trousers` before the upgrade? And could you please still try `apt install --reinstall trousers` to verify if it was that. > > Unpacking trousers (0.3.14+fixed1-1.2+pve1) over (0.3.14+fixed1-1.2) ... >> Setting up trousers (0.3.14+fixed1-1.2+pve1) ... >> Installing new version of config file /etc/init.d/trousers ... >> Job for trousers.service failed because the control process exited with >> error code. >> See "systemctl status trousers.service" and "journalctl -xe" for details. >> invoke-rc.d: initscript trousers, action "start" failed. >> ● trousers.service - LSB: starts tcsd >> Loaded: loaded (/etc/init.d/trousers; generated) >> Active: failed (Result: exit-code) since Wed 2021-10-06 01:13:08 PDT; >> 4ms ago >> Docs: man:systemd-sysv-generator(8) >> Process: 192905 ExecStart=/etc/init.d/trousers start (code=exited, >> status=30) >> CPU: 9ms > > Oct 06 01:13:08 mgmt1 systemd[1]: Starting LSB: starts tcsd... >> Oct 06 01:13:08 mgmt1 tcsd[192910]: TCSD TDDL[192910]: TrouSerS ioctl: >> (25) Inappropriate ioctl for device >> Oct 06 01:13:08 mgmt1 tcsd[192910]: TCSD TDDL[192910]: TrouSerS Falling >> back to Read/Write device support. >> Oct 06 01:13:08 mgmt1 tcsd[192910]: TCSD TCS[192910]: TrouSerS ERROR: TCS >> GetCapability failed with result = 0x1e >> Oct 06 01:13:08 mgmt1 trousers[192905]: Starting Trusted Computing daemon: >> tcsd >> Oct 06 01:13:08 mgmt1 trousers[192911]: failed! >> Oct 06 01:13:08 mgmt1 systemd[1]: trousers.service: Control process >> exited, code=exited, status=30/n/a >> Oct 06 01:13:08 mgmt1 systemd[1]: trousers.service: Failed with result >> 'exit-code'. >> Oct 06 01:13:08 mgmt1 systemd[1]: Failed to start LSB: starts tcsd. > > I should note that the spec sheet for the NUC7i5BNK says it does not have a > TPM - would that be related at all to these errors? Well yes, that was an issue with the old version, it checked that in a wrong way. But the newer, just uploaded package adapted that part, which was also tested by creating and dropping a fake /deb/tmp1 node, so it should work out. Or do you have a node? ls -l /dev/tmp* cheers, Thomas _______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
