On 01.03.21 16:12, Aaron Lauterer wrote:
> This RFC introduces support for Cephs RBD namespaces.
>
> A new storage config parameter 'namespace' defines the namespace to be
> used for the RBD storage.
>
> The namespace must already exist in the Ceph cluster as it is not
> automatically created.
>
> The main intention is to use this for external Ceph clusters. With
> namespaces, each PVE cluster can get its own namespace and will not
> conflict with other PVE clusters.
>
> Signed-off-by: Aaron Lauterer <a.laute...@proxmox.com>
> ---
>
> There are two ways to address namespaces. One is the '--namespace'
> parameter which is not supported by all rbd subcommands though!
> The other is the path style '<pool>/<namespace>/<image>' way.
So if the latter is supported by all why not use only that one?
Could be done in a small get path helper handling krdb/librbd differences
and returning just the path?
Note, I did not looked into this that close, so it may be that I'm
overlooking something, but they way you state this here and the fact that
having a single way to do the same thing is normally easier/nicer made me
wonder..
>
> Where possible I inject the '--namespace' parameter to the @$cmd but
> sometimes it is necessary to use the path style. There might be a nicer
> way to inject the namespace in these cases than what I have now.
>
> It would be good to have some tests but this cannot be done at build
> time since it requires a ceph cluster with namespaces configured.
> Therefore having a test script that can be called manually in a fitting
> test environment is what I still have planned (thanks @Dominik for the
> hint).
>
> Should I just place that in the 'test' directory of the repo without
> adding it to the Makefile?
yes please
>
> PVE/Storage/RBDPlugin.pm | 57 +++++++++++++++++++++++++++++++++-------
> 1 file changed, 48 insertions(+), 9 deletions(-)
>
> diff --git a/PVE/Storage/RBDPlugin.pm b/PVE/Storage/RBDPlugin.pm
> index fab6d57..8a6329f 100644
> --- a/PVE/Storage/RBDPlugin.pm
> +++ b/PVE/Storage/RBDPlugin.pm
> @@ -27,7 +27,9 @@ my $add_pool_to_disk = sub {
>
> my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
>
> - return "$pool/$disk";
> + my $namespace = $scfg->{namespace} ? "/$scfg->{namespace}" : "";
> +
> + return "$pool$namespace/$disk";
> };
>
> my $build_cmd = sub {
> @@ -77,6 +79,8 @@ my $librados_connect = sub {
> my $krbd_feature_update = sub {
> my ($scfg, $storeid, $name) = @_;
>
> + my $namespace = $scfg->{namespace};
> +
> my (@disable, @enable);
> my ($kmajor, $kminor) = PVE::ProcFSTools::kernel_version();
>
> @@ -102,6 +106,7 @@ my $krbd_feature_update = sub {
> if ($to_disable) {
> print "disable RBD image features this kernel RBD drivers is not
> compatible with: $to_disable\n";
> my $cmd = $rbd_cmd->($scfg, $storeid, 'feature', 'disable', $name,
> $to_disable);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command(
> $cmd,
> errmsg => "could not disable krbd-incompatible image features
> '$to_disable' for rbd image: $name",
> @@ -111,6 +116,7 @@ my $krbd_feature_update = sub {
> print "enable RBD image features this kernel RBD drivers supports:
> $to_enable\n";
> eval {
> my $cmd = $rbd_cmd->($scfg, $storeid, 'feature', 'enable', $name,
> $to_enable);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command(
> $cmd,
> errmsg => "could not enable krbd-compatible image features
> '$to_enable' for rbd image: $name",
> @@ -153,7 +159,10 @@ sub rbd_ls {
> my ($scfg, $storeid) = @_;
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'ls', '-l', '--format', 'json');
> + my $namespace = $scfg->{namespace};
> + push @$cmd, '--namespace', $namespace if $namespace;
> my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
> + $pool .= "/${namespace}" if $namespace;
>
> my $raw = '';
> my $parser = sub { $raw .= shift };
> @@ -199,6 +208,7 @@ sub rbd_ls_snap {
> my ($scfg, $storeid, $name) = @_;
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'ls', $name, '--format',
> 'json');
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
>
> my $raw = '';
> run_rbd_command($cmd, errmsg => "rbd error", errfunc => sub {}, outfunc
> => sub { $raw .= shift; });
> @@ -238,6 +248,7 @@ sub rbd_volume_info {
> }
>
> $cmd = &$rbd_cmd($scfg, $storeid, @options);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
>
> my $raw = '';
> my $parser = sub { $raw .= shift };
> @@ -281,6 +292,10 @@ sub properties {
> description => "Pool.",
> type => 'string',
> },
> + namespace=> {
> + description => "RBD Namespace.",
> + type => 'string',
> + },
> username => {
> description => "RBD Id.",
> type => 'string',
> @@ -302,6 +317,7 @@ sub options {
> disable => { optional => 1 },
> monhost => { optional => 1},
> pool => { optional => 1 },
> + namespace => { optional => 1 },
> username => { optional => 1 },
> content => { optional => 1 },
> krbd => { optional => 1 },
> @@ -349,9 +365,10 @@ sub path {
> $name .= '@'.$snapname if $snapname;
>
> my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
> - return ("/dev/rbd/$pool/$name", $vmid, $vtype) if $scfg->{krbd};
> + my $namespace = $scfg->{namespace} ? "/$scfg->{namespace}" : "";
> + return ("/dev/rbd/${pool}${namespace}/${name}", $vmid, $vtype) if
> $scfg->{krbd};
>
> - my $path = "rbd:$pool/$name";
> + my $path = "rbd:${pool}${namespace}/${name}";
>
> $path .= ":conf=$cmd_option->{ceph_conf}" if $cmd_option->{ceph_conf};
> if (defined($scfg->{monhost})) {
> @@ -370,6 +387,8 @@ sub find_free_diskname {
> my ($class, $storeid, $scfg, $vmid, $fmt, $add_fmt_suffix) = @_;
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'ls');
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> +
> my $disk_list = [];
>
> my $parser = sub {
> @@ -423,6 +442,7 @@ sub create_base {
>
> if (!$protected){
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'protect', $newname,
> '--snap', $snap);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd protect $newname snap '$snap'
> error");
> }
>
> @@ -451,6 +471,7 @@ sub clone_image {
>
> if (!$protected) {
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'protect', $volname,
> '--snap', $snapname);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd protect $volname snap
> $snapname error");
> }
> }
> @@ -476,6 +497,7 @@ sub alloc_image {
> $name = $class->find_free_diskname($storeid, $scfg, $vmid) if !$name;
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'create', '--image-format' , 2,
> '--size', int(($size+1023)/1024), $name);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd create $name' error");
>
> return $name;
> @@ -487,10 +509,13 @@ sub free_image {
> my ($vtype, $name, $vmid, undef, undef, undef) =
> $class->parse_volname($volname);
>
> + my $namespace = $scfg->{namespace};
> +
> my $snaps = rbd_ls_snap($scfg, $storeid, $name);
> foreach my $snap (keys %$snaps) {
> if ($snaps->{$snap}->{protected}) {
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'unprotect', $name,
> '--snap', $snap);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command($cmd, errmsg => "rbd unprotect $name snap '$snap'
> error");
> }
> }
> @@ -498,9 +523,11 @@ sub free_image {
> $class->deactivate_volume($storeid, $scfg, $volname);
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'purge', $name);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command($cmd, errmsg => "rbd snap purge '$volname' error");
>
> $cmd = &$rbd_cmd($scfg, $storeid, 'rm', $name);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command($cmd, errmsg => "rbd rm '$volname' error");
>
> return undef;
> @@ -511,6 +538,8 @@ sub list_images {
>
> $cache->{rbd} = rbd_ls($scfg, $storeid) if !$cache->{rbd};
> my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
> + my $namespace = $scfg->{namespace};
> + $pool .= "/${namespace}" if $namespace;
>
> my $res = [];
>
> @@ -575,9 +604,11 @@ sub deactivate_storage {
> }
>
> my $get_kernel_device_name = sub {
> - my ($pool, $name) = @_;
> + my ($pool, $name, $namespace) = @_;
> +
> + return "/dev/rbd/${pool}/${namespace}/${name}" if $namespace;
>
> - return "/dev/rbd/$pool/$name";
> + return "/dev/rbd/${pool}/${name}";
> };
>
> sub map_volume {
> @@ -585,12 +616,13 @@ sub map_volume {
>
> my ($vtype, $img_name, $vmid) = $class->parse_volname($volname);
>
> - my $name = $img_name;
> + my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
> + my $name = "${img_name}";
> $name .= '@'.$snapname if $snapname;
>
> - my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
> + my $namespace = $scfg->{namespace};
>
> - my $kerneldev = $get_kernel_device_name->($pool, $name);
> + my $kerneldev = $get_kernel_device_name->($pool, $name, $namespace);
>
> return $kerneldev if -b $kerneldev; # already mapped
>
> @@ -598,6 +630,7 @@ sub map_volume {
> $krbd_feature_update->($scfg, $storeid, $img_name);
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'map', $name);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command($cmd, errmsg => "can't map rbd volume $name");
>
> return $kerneldev;
> @@ -611,7 +644,7 @@ sub unmap_volume {
>
> my $pool = $scfg->{pool} ? $scfg->{pool} : 'rbd';
>
> - my $kerneldev = $get_kernel_device_name->($pool, $name);
> + my $kerneldev = $get_kernel_device_name->($pool, $name,
> $scfg->{namespace});
>
> if (-b $kerneldev) {
> my $cmd = &$rbd_cmd($scfg, $storeid, 'unmap', $kerneldev);
> @@ -653,6 +686,7 @@ sub volume_resize {
> my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'resize', '--allow-shrink',
> '--size', ($size/1024/1024), $name);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd resize '$volname' error");
> return undef;
> }
> @@ -663,6 +697,7 @@ sub volume_snapshot {
> my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'create', '--snap', $snap,
> $name);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd snapshot '$volname' error");
> return undef;
> }
> @@ -673,6 +708,7 @@ sub volume_snapshot_rollback {
> my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'rollback', '--snap',
> $snap, $name);
> + push @$cmd, '--namespace', $scfg->{namespace} if $scfg->{namespace};
> run_rbd_command($cmd, errmsg => "rbd snapshot $volname to '$snap'
> error");
> }
>
> @@ -684,14 +720,17 @@ sub volume_snapshot_delete {
> $class->deactivate_volume($storeid, $scfg, $volname, $snap, {});
>
> my ($vtype, $name, $vmid) = $class->parse_volname($volname);
> + my $namespace = $scfg->{namespace};
>
> my (undef, undef, undef, $protected) = rbd_volume_info($scfg, $storeid,
> $name, $snap);
> if ($protected){
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'unprotect', $name,
> '--snap', $snap);
> + push @$cmd, '--namespace', $namespace if $namespace;
> run_rbd_command($cmd, errmsg => "rbd unprotect $name snap '$snap'
> error");
> }
>
> my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'rm', '--snap', $snap,
> $name);
> + push @$cmd, '--namespace', $namespace if $namespace;
>
> run_rbd_command($cmd, errmsg => "rbd snapshot '$volname' error");
>
>
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
