On May 13, 2020 4:46 pm, Aaron Lauterer wrote: > The network config examples use the underscore but our tooling > generates the configs with dashes. > > Signed-off-by: Aaron Lauterer <a.laute...@proxmox.com> > --- > > pve-network.adoc | 80 ++++++++++++++++++++++++------------------------ > pvecm.adoc | 6 ++-- > 2 files changed, 43 insertions(+), 43 deletions(-) > > diff --git a/pve-network.adoc b/pve-network.adoc > index 8f3af0d..1c5ae17 100644 > --- a/pve-network.adoc > +++ b/pve-network.adoc > @@ -161,9 +161,9 @@ iface vmbr0 inet static > address 192.168.10.2 > netmask 255.255.255.0 > gateway 192.168.10.1 > - bridge_ports eno1 > - bridge_stp off > - bridge_fd 0 > + bridge-ports eno1 > + bridge-stp off > + bridge-fd 0 > ---- > > Virtual machines behave as if they were directly connected to the > @@ -209,9 +209,9 @@ auto vmbr0 > iface vmbr0 inet static > address 203.0.113.17 > netmask 255.255.255.248 > - bridge_ports none > - bridge_stp off > - bridge_fd 0 > + bridge-ports none > + bridge-stp off > + bridge-fd 0 > ---- > > > @@ -239,9 +239,9 @@ auto vmbr0 > iface vmbr0 inet static > address 10.10.10.1 > netmask 255.255.255.0 > - bridge_ports none > - bridge_stp off > - bridge_fd 0 > + bridge-ports none > + bridge-stp off > + bridge-fd 0 > > post-up echo 1 > /proc/sys/net/ipv4/ip_forward > post-up iptables -t nat -A POSTROUTING -s '10.10.10.0/24' -o eno1 > -j MASQUERADE > @@ -357,18 +357,18 @@ iface bond0 inet static > slaves eno1 eno2 > address 192.168.1.2 > netmask 255.255.255.0 > - bond_miimon 100 > - bond_mode 802.3ad > - bond_xmit_hash_policy layer2+3 > + bond-miimon 100 > + bond-mode 802.3ad > + bond-xmit-hash-policy layer2+3 > > auto vmbr0 > iface vmbr0 inet static > address 10.10.10.2 > netmask 255.255.255.0 > gateway 10.10.10.1 > - bridge_ports eno1 > - bridge_stp off > - bridge_fd 0 > + bridge-ports eno1 > + bridge-stp off > + bridge-fd 0 > > ---- > > @@ -389,18 +389,18 @@ iface eno2 inet manual > auto bond0 > iface bond0 inet manual > slaves eno1 eno2 > - bond_miimon 100 > - bond_mode 802.3ad > - bond_xmit_hash_policy layer2+3 > + bond-miimon 100 > + bond-mode 802.3ad > + bond-xmit-hash-policy layer2+3 > > auto vmbr0 > iface vmbr0 inet static > address 10.10.10.2 > netmask 255.255.255.0 > gateway 10.10.10.1 > - bridge_ports bond0 > - bridge_stp off > - bridge_fd 0 > + bridge-ports bond0 > + bridge-stp off > + bridge-fd 0 > > ---- > > @@ -474,15 +474,15 @@ iface vmbr0v5 inet static > address 10.10.10.2 > netmask 255.255.255.0 > gateway 10.10.10.1 > - bridge_ports eno1.5 > - bridge_stp off > - bridge_fd 0 > + bridge-ports eno1.5 > + bridge-stp off > + bridge-fd 0 > > auto vmbr0 > iface vmbr0 inet manual > - bridge_ports eno1 > - bridge_stp off > - bridge_fd 0 > + bridge-ports eno1 > + bridge-stp off > + bridge-fd 0 > > ---- > > @@ -502,10 +502,10 @@ iface vmbr0.5 inet static > > auto vmbr0 > iface vmbr0 inet manual > - bridge_ports eno1 > - bridge_stp off > - bridge_fd 0 > - bridge_vlan_aware yes > + bridge-ports eno1 > + bridge-stp off > + bridge-fd 0 > + bridge-vlan-aware yes > ---- > > The next example is the same setup but a bond is used to > @@ -523,9 +523,9 @@ iface eno2 inet manual > auto bond0 > iface bond0 inet manual > slaves eno1 eno2 > - bond_miimon 100 > - bond_mode 802.3ad > - bond_xmit_hash_policy layer2+3 > + bond-miimon 100 > + bond-mode 802.3ad > + bond-xmit-hash-policy layer2+3 > > iface bond0.5 inet manual > > @@ -534,15 +534,15 @@ iface vmbr0v5 inet static > address 10.10.10.2 > netmask 255.255.255.0 > gateway 10.10.10.1 > - bridge_ports bond0.5 > - bridge_stp off > - bridge_fd 0 > + bridge-ports bond0.5 > + bridge-stp off > + bridge-fd 0 > > auto vmbr0 > iface vmbr0 inet manual > - bridge_ports bond0 > - bridge_stp off > - bridge_fd 0 > + bridge-ports bond0 > + bridge-stp off > + bridge-fd 0 > > ---- > > diff --git a/pvecm.adoc b/pvecm.adoc > index 4bf2f59..2866582 100644 > --- a/pvecm.adoc > +++ b/pvecm.adoc > @@ -1256,9 +1256,9 @@ iface vmbr0 inet static > address 192.X.Y.57 > netmask 255.255.250.0 > gateway 192.X.Y.1 > - bridge_ports eno1 > - bridge_stp off > - bridge_fd 0 > + bridge-ports eno1 > + bridge-stp off > + bridge-fd 0 > > # cluster network > auto eno2 > -- > 2.20.1 > > > _______________________________________________ > pve-devel mailing list > pve-de...@pve.proxmox.com > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel > >
_______________________________________________ pve-devel mailing list pve-devel@lists.proxmox.com https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
