Hi Angel, In terms of having a regular execution of puppet device, you could utilise the device_manager and set up a run_interval parameter: https://forge.puppet.com/puppetlabs/device_manager#run_interval which will set up a regular cron job.
Also, it is worth adding cisco_ios::server to your puppet server manifest alongside cisco_ios::proxy, as per the cisco_ios setup guide: https://forge.puppet.com/puppetlabs/cisco_ios#setup If you still have issues with the resource_api autoload, you could try adding the gem to your puppetserver: puppetserver gem install puppet-resource_api puppetserver reload puppet agent -tv Regards Will On Wednesday, December 5, 2018 at 1:32:23 PM UTC, amateo wrote: > > I have it working and I can run puppet device to send > configuration to > device. > > Now, I would like to configure the agent proxy so I don't have to > manually run puppet device to send configuration to devices, but to > puppet agent doing it for me in every run. Is this possible, how do I > have to do it? > > I'm trying it with this manifest: > > node default { > > include cisco_ios::proxy > > exec {'run puppet device': > command => '/opt/puppetlabs/bin/puppet device --verbose --logdest > syslog', > require => Class['cisco_ios::proxy'], > } > > device_manager {'switch_cisco_pruebas': > type => 'cisco_ios', > credentials => { > address => '10.54.1.111', > port => '22', > username => 'test', > password => 'test123', > enable_password => '123test', > }, > } > > } > > node switch_cisco_pruebas { > > ntp_server { '1.2.3.5': > ensure => 'present', > key => 94, > prefer => true, > minpoll => 4, > maxpoll => 14, > } > > ios_config { 'prueba_comandos': > command => " > default interface Gi1/0/2 > int gi1/0/2 > description Prueba Puppet > ", > } > } > > With this manifest, the "run puppet device" exec is done in every > puppet agent run, sending configuration to device, and works with > ntp_server and banner resources, but it doesn't work with ios_config > one, I get the error > > Dec 5 14:23:55 leo10 puppet-agent[66368]: Could not retrieve catalog > from remote server: Error 500 on SERVER: Server Error: Evaluation Error: > Error while evaluating a Resource Statement, Could not autoload > puppet/type/ios_config: no such file to load -- puppet/resource_api > (file: /etc/puppetlabs/code/environments/production/manifests/site.pp, > line: 33, column: 2) on node switch_cisco_pruebas > > The same manifest, applied with puppet device works without any > problem. > > What do I have to do to automatically configure device in every > puppet run? > > El 5/12/18 a las 12:11, Will Meek escribió: > > Hi Angel, > > > > Thank you for the detail so far! > > > > The only way I can reproduce this on my setup is with having > > puppetlabs-cisco_ios 0.5.0 installed in the production environment, > > whereby puppet tries to pick up the old 'ios' provider rather than the > > >0.6.0 'cisco_ios' provider. > > > > puppet device --verbose --target switch_cisco_pruebas --modulepath > > /etc/puppetlabs/code/environments/ciscotest/modules --resource > ntp_server > > > > Error: Could not autoload puppet/provider/ntp_server/ios: superclass > > mismatch for class NtpServer > > > > > > > > puppet module list > > > > /etc/puppetlabs/code/environments/production/modules > > > > └── puppetlabs-cisco_ios (v0.5.0) > > > > puppet module list --environment ciscotest > > > > /etc/puppetlabs/code/environments/ciscotest/modules > > > > ├── puppetlabs-cisco_ios (v0.6.1) > > > > > > > > Do you have an old version of the cisco_ios module installed in any > > environments? > > > > This should be addressed by the resolution of Puppet > > ticket https://tickets.puppetlabs.com/browse/PUP-8766, hopefully early > 2019. > > > > In the meantime, if you add a --libdir are you successful? > > > > eg. > > > > sudo puppet device --verbose --target switch_cisco_pruebas --modulepath > > /etc/puppetlabs/code/environments/ciscotest/modules --resource > > ntp_server --libdir > > /etc/puppetlabs/code/environments/ciscotest/modules/cisco_ios/lib/ > > > > Info: retrieving resource: ntp_server from switch_cisco_pruebas at > > file:///etc/puppetlabs/puppet/devices/switch_cisco_pruebas.conf > > > > ntp_server { '1.2.3.5': > > > > key => 94, > > > > minpoll => 4, > > > > maxpoll => 14, > > > > prefer => true, > > > > ensure => 'present', > > > > } > > > > > > Out of interest - what version of Puppet are you running? > > > > puppet --version > > 6.0.4 > > > > Thanks > > Will > > > > On Friday, November 30, 2018 at 1:29:16 PM UTC, amateo wrote: > > > > I'm beginning with puppetlabs/cisco_ios module. For the moment, just > a > > proof of concept. > > > > These are the modules I have installed: > > > > /etc/puppetlabs/code/environments/ciscotest/modules > > ├── puppetlabs-cisco_ios (v0.6.1) > > ├── puppetlabs-concat (v5.1.0) > > ├── puppetlabs-device_manager (v2.7.0) > > ├── puppetlabs-hocon (v1.0.1) > > ├── puppetlabs-netdev_stdlib (v0.17.0) > > ├── puppetlabs-puppetserver_gem (v1.0.0) > > ├── puppetlabs-resource_api (v1.0.0) > > └── puppetlabs-stdlib (v5.1.0) > > > > In _manifests/site.pp_ I have: > > node default { > > device_manager {'switch_cisco_pruebas': > > type => 'cisco_ios', > > credentials => { > > address => '1.2.3.4', > > port => '22', > > username => 'test', > > password => 'password', > > enable_password => 'enablepassword', > > }, > > } > > } > > > > The problem I have is that running puppet agent gives no error, but > the > > device command doesn't work. I have the error: > > > > root@leo10:/etc/puppetlabs/code/environments/ciscotest# puppet > device > > --verbose --target switch_cisco_pruebas --apply ~/manifest.pp --noop > > Error: Could not autoload puppet/provider/ntp_server/cisco_ios: > > superclass mismatch for class Device > > Error: Could not autoload puppet/type/ntp_server: Could not autoload > > puppet/provider/ntp_server/cisco_ios: superclass mismatch for class > > Device > > Error: Evaluation Error: Error while evaluating a Resource > Statement, > > Could not autoload puppet/type/ntp_server: Could not autoload > > puppet/provider/ntp_server/cisco_ios: superclass mismatch for class > > Device (file: /home/amateo_adm/manifest.pp, line: 1, column: 1) on > node > > switch_cisco_pruebas > > > > Could anybody help me? > > > > -- > > Angel L. Mateo Martínez > > Sección de Telemática > > Área de Tecnologías de la Información > > y las Comunicaciones Aplicadas (ATICA) > > http://www.um.es/atica > > Tfo: 868889150 > > Fax: 868888337 > > > > -- > > You received this message because you are subscribed to the Google > > Groups "Puppet Users" group. > > To unsubscribe from this group and stop receiving emails from it, send > > an email to puppet-users...@googlegroups.com <javascript:> > > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/puppet-users/ef8056dd-83f3-4ed6-907b-42eec15cf9fc%40googlegroups.com > > > < > https://groups.google.com/d/msgid/puppet-users/ef8056dd-83f3-4ed6-907b-42eec15cf9fc%40googlegroups.com?utm_medium=email&utm_source=footer>. > > > > For more options, visit https://groups.google.com/d/optout. > > -- > Angel L. Mateo Martínez > Sección de Telemática > Área de Tecnologías de la Información > y las Comunicaciones Aplicadas (ATICA) > http://www.um.es/atica > Tfo: 868889150 > Fax: 868888337 > -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to puppet-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/puppet-users/06283f9a-861d-4b95-86fb-1e2ccb5abdef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
