I don't know where your Puppet gets that path from. I've never seen it
before. Maybe the setting is specified in your config file. Run the
following commands as the user that your puppetmaster uses:
puppet --configprint modulepath
This command will show in which directories Puppet looks for your modules.
In your case, I'd expect /file_metadata to be in that list.
puppet --configprint config
This command will show where Puppet's config file is stored. Open that file
and you can set your prefered modulepath like this example:
[main]
modulepath =
/etc/puppetlabs/puppet/modules:/opt/puppet/share/puppet/modules
Run the first command again, and you should see that Puppet now uses the
path you specified.
Hope this helps,
Martijn Heemels
Op maandag 17 september 2012 09:42:12 UTC+2 schreef itJunky het volgende:
>
> My main issue it Where i can find directory "file_metadata"?
> If I learn it, i can edit auth.conf to it directory.
>
> пятница, 14 сентября 2012 г., 18:24:43 UTC+4 пользователь Cosmin-Viorel
> Ilie написал:
>>
>> I think you need to edit the auth.conf file to allow the puppet client
>> access.
>>
>> On Friday, September 14, 2012 5:12:49 PM UTC+3, itJunky wrote:
>>>
>>> I have a directive like this:
>>>
>>> file { "/etc/sudoers":
>>> owner => root,
>>> group => root,
>>> mode => 440,
>>> source => "puppet:///modules/sudo/sudoers"
>>> }
>>>
>>> When i try to get this file on puppet agent, i see error:
>>> err: /Stage[main]/Sudo/File[/etc/sudoers]: Could not evaluate: Error 403
>>> on SERVER: Forbidden request: puppet-client(192.168.200.170) access to
>>> /file_metadata/modules/sudo/sudoers [find] authenticated at line 104 Could
>>> not retrieve file metadata for puppet:///modules/sudo/sudoers: Error 403 on
>>> SERVER: Forbidden request: puppet-client(192.168.200.170) access to
>>> /file_metadata/modules/sudo/sudoers [find] authenticated at line 104 at
>>> /etc/puppet/manifests/site.pp:12
>>>
>>> In this error message i see a path
>>> "/file_metadata/modules/sudo/sudoers"! Where i can find directory
>>> "file_metadata"?
>>>
>>> I trying to change any of directives like vardir, modulepath and much
>>> more, but not anyone of path not work as /file_metadata/ =(
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/KnWddP9IBtsJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
