Hi, How does your ifconfig -a output looks like?
Suspects: https://github.com/puppetlabs/facter/blob/master/lib/facter/interfaces.rb https://github.com/puppetlabs/facter/blob/master/lib/facter/util/ip.rb KW On Wednesday, 5 September 2012 09:52:03 UTC+1, Axel Bock wrote: > > Hello, > > @Joseph: not yet. > > @Eric: sure :) . SLES 11 SP2, and the output is here: > http://pastebin.com/jqgNmewk > > But I have an idea. I have another host where it still works. The host it > stopped working on has two IP addresses configured on one (!) network > device. so an "ip a" gives me: > [...] > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP qlen 1000 > link/ether 00:50:56:99:05:02 brd ff:ff:ff:ff:ff:ff > *inet 130.250.8.15/24 *brd 130.250.8.255 scope global eth0 > *inet 130.250.8.20/24 *brd 130.250.8.255 scope global secondary eth0 > [...] > > Maybe this is not actually covered by the detection algorithm of facter? :) > > > Anyway, thanks for your help! > Axel. > > > > > > Am Dienstag, 4. September 2012 23:57:08 UTC+2 schrieb Eric Sorenson: >> >> Hi Axel - what OS? What version of Facter? What does the output of your >> 'ifconfig -a' (or local equivalent) look like? Could you please run 'facter >> --debug' and pastebin the output somewhere? >> >> On Monday, August 20, 2012 1:19:39 AM UTC-7, Axel Bock wrote: >>> >>> Hi readers, >>> >>> another problem of mine. A host which worked just fine on friday is now >>> not able to find out its own IP address. The reason is pretty simple as far >>> as I have figured out: Facter. Facter returns the network interfaces just >>> fine: interfaces=eth0,eth1, but then the ipaddress_ETHx entries are >>> completely missing. >>> >>> Any idea what could be the cause of this? >>> >>> >>> Thanks in advance & greetings, >>> Axel. >>> >> -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/fR9hLVhv3bsJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
