----- Original Message ----- > From: "Christophe L" <cl.subscript...@gmail.com> > To: puppet-users@googlegroups.com > Sent: Thursday, May 17, 2012 2:36:49 PM > Subject: [Puppet Users] Puppet facter 1.6.8 and inet6 addresses > > Hello, > > when running the command "ip a" on a debian VM, I get this > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > state UP qlen 1000 > link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff > inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0 > inet6 fe80::250:56ff:fe99:7335/64 scope link > valid_lft forever preferred_lft forever > > But with facter run as root I don't get any inet6 adress > > facter | grep addr > > ipaddress => 10.66.112.71 > ipaddress_eth0 => 10.66.112.71 > ipaddress_lo => 127.0.0.1 > macaddress => 00:50:56:99:73:35 > macaddress_eth0 => 00:50:56:99:73:35 > > I'm using facter v1.6.8 > > Could you please tell me how to get the IPv6 adresse using facter ?
Facter specifically do not report link local addresses. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
