I mean does the code look ok?
Are we thinking that it is a prob with the vm config on the esx side?
On Dec 21, 4:30 pm, Luke <lutay...@gmail.com> wrote:
> Hi,
>
> The macaddress in the vm is set to automatic but the populated value
> matches exactly the value that I put into the file, that is where I
> got it from (in fact I checked the ifconfig-eth0 before creating the
> file and it had the same values that I specified).
>
> On Dec 21, 12:03 pm, Charles Buckley <rijrun...@gmail.com> wrote:
>
>
>
>
>
>
>
> > Hello,
>
> > That is not quite what I am asking. Your VM configures a set of
> > parameters for the
> > system to use when you build out the VM environment. One of those values is
> > that
> > macaddr of the server. (Not just the driver).
>
> > These settings look to all be on the VM guest. The host table.
> > resolv.conf.
>
> > What I am trying to determine is why you are feeding it a macaddr, at
> > all. If you
> > were creating the VM guest, I could see feeding it a macaddr. But, here you
> > are trying
> > to change the macaddr of an existing guest. (basically, if you bring up the
> > VM
> > network properties, you will likely find that the macaddr below is
> > different than the
> > one the VM host has in the guest properties.)
>
> > Where did you acquire the macaddr below to use for this?
>
> > Charles Buckley
>
> > On Wed, Dec 21, 2011 at 8:05 AM, Luke <lutay...@gmail.com> wrote:
> > > Hello Thank you for your reply.
>
> > > I don't seem to have a 70-persistent-net.rules. I have a 60-net.rules
> > > with
>
> > > ACTION=="add", SUBSYSTEM=="net", IMPORT{program}="/lib/udev/
> > > rename_device"
> > > SUBSYSTEM=="net", RUN+="/etc/sysconfig/network-scripts/net.hotplug"
>
> > > What do you mean by VM definition. I made sure that it was in the
> > > right vlan etc. One thing that I noticed is that the puppet learning
> > > VM is set to flexible while the rest of them are set to E1000.
>
> > > On Dec 20, 4:46 pm, Charles Buckley <rijrun...@gmail.com> wrote:
> > > > Hello,
>
> > > > What are the VM's definitions of its network interfaces?
>
> > > > Also, if you are trying Linux, what are the contents of
> > > > /etc/udev/rules.d/70-persistent-net.rules ?
>
> > > > Charles Buckley
>
> > > > On Tue, Dec 20, 2011 at 1:41 PM, Luke <lutay...@gmail.com> wrote:
> > > > > Hello,
>
> > > > > I created a module for modifying the base network settings on a
> > > > > machine. However no matter what changes I make it keeps giving me the
> > > > > error "has different MAC address than expected, ignoring" when the
> > > > > network tries to startup.
>
> > > > > I am testing this out on the puppet learning VM.
>
> > > > > Does anyone see anything wrong with my code:
>
> > > > > init.pp
>
> > > > > --------------------------
>
> > > > > define basehost ($ipaddress, $gateway, $hostname, $environ,
> > > > > $macaddress) {
>
> > > > > file { 'hosts':
> > > > > path => '/etc/hosts',
> > > > > ensure => 'present',
> > > > > owner => 'root',
> > > > > group => 'root',
> > > > > mode => '644',
> > > > > content => template("basehost/hosts.erb"),
> > > > > notify => Service[network],
>
> > > > > }
>
> > > > > file { 'resolv.conf':
> > > > > path => '/etc/resolv.conf',
> > > > > ensure => 'present',
> > > > > owner => 'root',
> > > > > group => 'root',
> > > > > mode => '644',
> > > > > content => template("basehost/resolv.conf.erb"),
> > > > > notify => Service[network],
>
> > > > > }
>
> > > > > file { 'network':
> > > > > path => '/etc/sysconfig/network',
> > > > > ensure => 'present',
> > > > > owner => 'root',
> > > > > group => 'root',
> > > > > mode => '644',
> > > > > content => template("basehost/network.erb"),
> > > > > notify => Service[network],
>
> > > > > }
>
> > > > > file { 'ifcfg-eth0':
> > > > > path => '/etc/sysconfig/network-scripts/ifcfg-eth0',
> > > > > ensure => 'present',
> > > > > owner => 'root',
> > > > > group => 'root',
> > > > > mode => '644',
> > > > > content => template("basehost/ifcfg-eth0.erb"),
> > > > > notify => Service[network],
>
> > > > > }
>
> > > > > service { network:
> > > > > ensure => "running",
> > > > > hasstatus => "true",
> > > > > hasrestart => "true",
> > > > > restart => "/etc/init.d/network restart",
> > > > > }
>
> > > > > }
>
> > > > > hosts.erb
> > > > > ----------------------------
>
> > > > > # Do not remove the following line, or various programs
> > > > > # that require network functionality will fail.
> > > > > 127.0.0.1 localhost.localdomain localhost
> > > > > <%= ipaddress %> <%= hostname %> <%= hostname %>.<%= environ
> > > > > %>.mydomain.local manage.<%= environ %>.mydomain.net
> > > > > ::1 localhost6.localdomain6 localhost6
>
> > > > > resolve.conf.erb
> > > > > ----------------
>
> > > > > search <%= environ %>.mydomain.local
> > > > > nameserver 10.180.0.2
> > > > > nameserver 10.180.0.4
>
> > > > > network.erb
>
> > > > > ------------------
>
> > > > > NETWORKING=yes
> > > > > NETWORKING_IPV6=no
> > > > > HOSTNAME=<%= hostname %>.<%= environ %>.mydomain.local
> > > > > GATEWAY=<%= gateway %>
>
> > > > > ifcfg-eth0.erb
>
> > > > > ----------------
>
> > > > > # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
> > > > > DEVICE=eth0
> > > > > BOOTPROTO=static
> > > > > IPADDR=<%= ipaddress %>
> > > > > NETMASK=255.255.255.0
> > > > > ONBOOT=yes
> > > > > HWADDR=<%= macaddress %>
>
> > > > > Gets kicked off using:
>
> > > > > basehost {'basehostsetup':
> > > > > ipaddress => '10.148.0.32',
> > > > > gateway => '10.148.0.1',
> > > > > hostname => 'myhostname',
> > > > > environ => 'test',
> > > > > macaddress => '00:50:56:ac:40:8a',
> > > > > }
>
> > > > > --
> > > > > You received this message because you are subscribed to the Google
> > > Groups
> > > > > "Puppet Users" group.
> > > > > To post to this group, send email to puppet-users@googlegroups.com.
> > > > > To unsubscribe from this group, send email to
> > > > > puppet-users+unsubscr...@googlegroups.com.
> > > > > For more options, visit this group at
> > > > >http://groups.google.com/group/puppet-users?hl=en.
>
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "Puppet Users" group.
> > > To post to this group, send email to puppet-users@googlegroups.com.
> > > To unsubscribe from this group, send email to
> > > puppet-users+unsubscr...@googlegroups.com.
> > > For more options, visit this group at
> > >http://groups.google.com/group/puppet-users?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
