Hi John, Thank you very much for the answer, it's seem like a good one. its going to help me a lot!!
I will be out of office until next week, so i can check that in a while, but im sure that this mail will fixed my problem. Thanks again, Dotan On Tue, Sep 8, 2009 at 3:43 AM, John Warburton <jwarbur...@gmail.com> wrote: > > Aplogies about the asterisks. I copied and pasted from MS Word into > Gmail and the formatting looked like it stayed. > > Unfortunately, my bold formatting came out as asterisk text asterisk > > John > > On Sep 8, 10:33 am, John Warburton <jwarbur...@gmail.com> wrote: > > Hi Dotan > > > > Here is my documentation trail for compiling the puppet supporting > > environment for ESX 3.5. Note that our installation standard requires > > applications to be installed under /apps, but you should get the idea. > The > > only hairy bit I had was with the ruby-augeas link, where I had to hack > the > > Makefile a bit. I think that was due to the non standard locations. > > > > As a side note, VMware can get very picky about you running 3rd party > apps > > on an ESX server when you make support calls, so I actually did the > install > > locally on a dev ESX server, then moved it all onto an NFS share, and > mount > > that every hour and do a puppet client run > > > > Regards > > > > John > > > > [r...@esxhost tmp]# *cd /var/tmp* > > > > [r...@esxhost tmp]# *wgethttp:// > www.openssl.org/source/openssl-0.9.8j.tar.gz* > > > > [r...@esxhost tmp]# *tar zxf /var/tmp/openssl-0.9.8j.tar.gz * > > > > [r...@esxhost tmp]# *cd openssl-0.9.8j * > > > > [r...@esxhost openssl-0.9.8j]# *./Configure > > --prefix=/apps/puppet/openssl-0.9.8j linux-elf * > > > > [r...@esxhost openssl-0.9.8j]# *make > MAKELOG 2>&1 &* > > > > [r...@esxhost openssl-0.9.8j]# *make install > MAKELOG.install 2>&1 &* > > > > [r...@esxhost openssl-0.9.8j]# *ls -l /apps/puppet/openssl-0.9.8j* > > > > total 16 > > > > drwxr-xr-x 2 root root 4096 Feb 26 05:51 bin > > > > drwxr-xr-x 3 root root 4096 Feb 26 05:51 include > > > > drwxr-xr-x 4 root root 4096 Feb 26 05:51 lib > > > > drwxr-xr-x 6 root root 4096 Feb 26 05:51 ssl > > > > [r...@esxhost tmp]# *wgetftp:// > ftp.ruby-lang.org/pub/ruby/1.8/ruby-1.8.7-p160.tar.bz2* > > > > [r...@esxhost tmp]# *tar xjf /var/tmp/warbjoh/ruby-1.8.7-p160.tar.bz2* > > > > [r...@esxhost tmp]# *cd ruby-1.8.7-p160* > > > > [r...@esxhost ruby-1.8.7]# *./configure --with-openssl > > --with-openssl-dir=/apps/puppet/openssl-0.9.8j > > --prefix=/apps/puppet/ruby-1.8.7-p160 * > > > > [r...@esxhost ruby-1.8.7]# *make > MAKELOG 2>&1 &* > > > > [r...@esxhost ruby-1.8.7]# *make install > MAKELOG.install 2>&1 &* > > > > [r...@esxhost tmp]# *wgethttp://ttsky.net/src/ruby-shadow-1.4.1.tar.gz* > > > > [r...@esxhost tmp]# *cp /var/tmp/src/ruby-shadow-1.4.1.tar.gz /var/tmp* > > > > [r...@esxhost tmp]# *tar xzf ruby-shadow-1.4.1.tar.gz* > > > > [r...@esxhost shadow-1.4.1]# */apps/puppet/ruby-1.8.7-p160/bin/ruby > > extconf.rb* > > > > [r...@esxhost shadow-1.4.1]# *make* > > > > [r...@esxhost shadow-1.4.1]# *make install* > > > > /usr/bin/install -c -m 0755 shadow.so > > /apps/puppet/ruby-1.8.7-p160/lib/ruby/site_ruby/1.8/i686-linux > > > > [r...@esxhost tmp]# *wgethttp:// > rubyforge.org/frs/download.php/56872/rake-0.8.7.tgz* > > > > [r...@esxhost rake-0.8.7]# */apps/puppet/ruby-1.8.7-p160/bin/ruby > install.rb > > * > > > > [r...@esxhost tmp]# *wgethttp:// > rubyforge.org/frs/download.php/56227/rubygems-1.3.3.tgz* > > > > [r...@esxhost rubygems-1.3.3]# */apps/puppet/ruby-1.8.7-p160/bin/ruby > > setup.rb* > > > > # Augeas requires readline libraries & headers, and readline-devel not on > > server > > > > [r...@esxhost tmp]# *wget --passive-ftpftp:// > ftp.gnu.org/gnu/readline/readline-4.3.tar.gz > > *[r...@esxhost readline-4.3]# *./configure > > --prefix=/apps/puppet/readline-4.3* > > > > [r...@esxhost readline-4.3]# *make > MAKELOG 2>&1 &* > > > > [r...@esxhost readline-4.3]# *make install > MAKELOG.install 2>&1 &* > > > > [r...@esxhost tmp]# *wgethttp://augeas.net/download/augeas-0.5.0.tar.gz* > > > > [r...@esxhost tmp]# *wgethttp:// > augeas.net/download/ruby/ruby-augeas-0.2.0.tgz* > > > > [r...@esxhost augeas-0.5.0]# > > > > [r...@esxhost augeas-0.5.0]# *export > > CPPFLAGS=-I/apps/puppet/readline-4.3/include > > LDFLAGS=-L/apps/puppet/readline-4.3/lib * > > > > [r...@esxhost augeas-0.5.0]# *./configure > --prefix=/apps/puppet/augeas-0.5.0 > > * > > > > [r...@esxhost augeas-0.5.0]# *make > MAKELOG 2>&1 &* > > > > [r...@esxhost augeas-0.5.0]# *make install > MAKELOG.install 2>&1 &* > > > > [r...@esxhost tmp]# *cd ruby-augeas-0.2.0* > > > > [r...@esxhost ruby-augeas-0.2.0]# */apps/puppet/ruby-1.8.7-p160/bin/ruby > > ext/augeas/extconf.rb > > --with-augeas-config=/apps/puppet/augeas-0.5.0/lib/pkgconfig* > > > > # I can’t get this to work naturally, so have to hack the Makefile, My > lack > > of understanding of ruby in general > > > > [r...@esxhost ruby-augeas-0.2.0]# *vi Makefile* > > > > INCFLAGS = -I. -I$(topdir) -I$(hdrdir) -I$(srcdir) > > -I/apps/puppet/augeas/include > > > > CPPFLAGS = $(DEFS) $(cppflags) -I/apps/puppet/augeas/include > > > > ldflags = -L. -rdynamic -Wl,-export-dynamic -L/apps/puppet/augeas/lib > > -Wl,-R/apps/puppet/augeas/lib > > > > LIBS = -lrt -ldl -lcrypt -lm -lc -laugeas -lruby-static > > > > [r...@esxhost ruby-augeas-0.2.0]# *make* > > > > [r...@esxhost ruby-augeas-0.2.0]# *make install* > > > > /usr/bin/install -c -m 0755 _augeas.so > > /apps/puppet/ruby-1.8.7-p160/lib/ruby/site_ruby/1.8/i686-linux > > > > [r...@esxhost ruby-augeas-0.2.0]# *cp lib/augeas.rb > > /apps/puppet/ruby/lib/ruby/site_ruby/1.8/* > > > > [r...@esxhost tmp]# *cp -rp /var/tmp/src/facter-1.5.3 /apps/puppet/* > > > > [r...@esxhost tmp]# *cp -rp /var/tmp/src/puppet-0.24.7 /apps/puppet/* > > > > [r...@esxhost ruby-1.8.7]# *cd /apps/puppet/* > > > > [r...@esxhost puppet]# *ln -s facter-1.5.3 facter* > > > > [r...@esxhost puppet]# *ln -s puppet-0.24.7 puppet* > > > > [r...@esxhost puppet]# *ln -s ruby-1.8.7 ruby* > > > > [r...@esxhost puppet]# *ls -l /apps/puppet* > > > > total 16 > > > > lrwxrwxrwx 1 root root 12 Aug 24 03:10 augeas -> > > augeas-0.5.0 > > > > drwxr-xr-x 6 root root 4096 May 21 03:00 augeas-0.5.0 > > > > lrwxrwxrwx 1 root root 12 Aug 24 03:10 facter -> > > facter-1.5.5 > > > > drwxr-xr-x 8 root root 4096 Feb 20 2009 facter-1.5.3 > > > > drwxr-xr-x 7 root root 4096 May 22 14:49 facter-1.5.5 > > > > drwxr-xr-x 6 root root 4096 Feb 26 2009 openssl-0.9.8j > > > > lrwxrwxrwx 1 root root 13 Aug 24 03:10 puppet -> > > puppet-0.24.7 > > > > drwxr-xr-x 10 root root 4096 Dec 16 2008 puppet-0.24.7 > > > > lrwxrwxrwx 1 root root 12 Aug 24 03:10 readline -> > > readline-4.3 > > > > drwxr-xr-x 6 root root 4096 May 21 02:50 readline-4.3 > > > > lrwxrwxrwx 1 root root 15 Aug 24 03:10 ruby -> > > ruby-1.8.7-p160 > > > > drwxr-xr-x 5 root root 4096 May 19 07:28 ruby-1.8.7-p160 > > > > Edit src/facter-1.5.3/lib/facter/network.rb withhttp:// > projects.reductivelabs.com/issues/1926 > > > > It works: > > > > [r...@esxhost root]# *export > > > PATH=/apps/puppet/ruby/bin:/apps/puppet/puppet/bin:/apps/puppet/facter/bin:$PATH > > * > > > > [r...@esxhost root]# *export > > RUBYLIB=/apps/puppet/puppet/lib:/apps/puppet/facter/lib* > > > > [r...@esxhost root]# *facter* > > > > architecture => i386 > > > > domain => insidelive.net > > > > facterversion => 1.5.3 > > > > fqdn => esxhost.fq.dn > > > > hardwareisa => i686 > > > > hardwaremodel => i686 > > > > hostname => esxhost > > > > id => root > > > > interfaces => vmnic0,vmnic1,vmnic2,vmnic3,vmnic4,vmnic5,vswif0 > > > > ipaddress => x.x.x.x > > > > ipaddress_vswif0 => x.x.x.x > > > > kernel => Linux > > > > kernelrelease => 2.4.21-57.ELvmnix > > > > kernelversion => 2.4.21 > > > > macaddress => 00:12:79:A5:8C:3D > > > > macaddress_vmnic0 => 00:12:79:A5:8C:3D > > > > macaddress_vmnic1 => 00:12:79:A5:8C:3C > > > > macaddress_vmnic2 => 00:19:BB:EA:A2:50 > > > > macaddress_vmnic3 => 00:19:BB:EA:A2:51 > > > > macaddress_vmnic4 => 00:19:BB:EA:A2:52 > > > > macaddress_vmnic5 => 00:19:BB:EA:A2:53 > > > > macaddress_vswif0 => 00:50:56:47:91:F0 > > > > manufacturer => HP > > > > memoryfree => 121.00 MB > > > > memorysize => 262.27 MB > > > > netmask => 255.255.255.0 > > > > netmask_vswif0 => 255.255.255.0 > > > > network_vswif0 => x.x.x.0 > > > > operatingsystem => RedHat > > > > operatingsystemrelease => 3 > > > > processor0 => Intel(R) Xeon(TM) CPU 3.60GHz > > > > processorcount => 1 > > > > productname => ProLiant DL380 G4 > > > > ps => ps -ef > > > > puppetversion => 0.24.7 > > > > rubysitedir => /apps/puppet/ruby-1.8.7/lib/ruby/site_ruby/1.8 > > > > rubyversion => 1.8.7 > > > > serialnumber => GB8520AHNS > > > > sshdsakey => > > > 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 > > > > sshrsakey => > > > AAAAB3NzaC1yc2EAAAABIwAAAIEA0jC43LdG1SEeS889EoO6wFKZ/KYo23XoiJP9rLjwDbOGs5IJoSFNSTT0ABBBekluYVO11gpla9tlOiSnDPA6RP7M89QhMkZXTiaFYcbssRE6zKsoofkuCI74UiF6dPBbsj1nNw1kjwACcQ5d0O3GVJiPECfrm9IOltizDnbih9U= > > > > swapfree => 361.30 MB > > > > swapsize => 541.85 MB > > > > type => Rack Mount Chassis > > > > uniqueid => 3445b597 > > > > uptime => 107 days > > > > uptime_days => 107 > > > > uptime_hours => 2587 > > > > uptime_seconds => 9315873 > > > > virtual => vmware_server > > > > 2009/9/7 Dotan <dotan....@gmail.com> > > > > > > > > > Hey, > > > > > I´m trying to install puppet on esx 3.5 server, but I have some > > > difficulties. > > > I need to compile a new version of ruby. > > > If there anybody that succeed in this part or with the whole process, > > > its will be great for any post about it. > > > > > TIA, > > > > > Dotan > > > > -- > > John Warburton > > Ph: 0417 299 600 > > Email: jwarbur...@gmail.com > > > -- Dotan Gutmacher --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com To unsubscribe from this group, send email to puppet-users+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en -~----------~----~----~----~------~----~------~--~---
