That’s correct, it only adds latency. You can delay the other tracks to bring them into alignment with the latent one. Another option is committing the latent track, and nudging its audio back to the correct location. I would do option 2 if the latency was severe, like a half second or more.
> On Dec 21, 2020, at 13:12, John André Lium-Netland <[email protected]> > wrote: > > Hi, yes I was considering the time shifter, but doesn’t it only push > forward? In my case I need to compensate the delay by pushing backwards…. I > tried to do that, but it didn’t work as expected… > > Probably I’m doing something wrong... :) > > Best, > John André > > >> 19. des. 2020 kl. 16:15 skrev Michael Holmes <[email protected]>: >> >> You could add the time adjuster plugin onto every track or bus that needs >> it, and set the samples delay according to the latency. For instance, if >> there is 5 ms latency, you take your session sample rate divided by 1000. >> That will give you the samples per millisecond. Multiply the result, i.e. 48 >> samples for 48 khz, times 5 milliseconds, so, 240 samples here,and use that >> amount in time adjuster. >> >>>> On Dec 18, 2020, at 16:35, John André Lium-Netland >>>> <[email protected]> wrote: >>> >>> Hi all, >>> >>> For a specific plugin the latency compensation feature in PT is not enough >>> as my system currently is set up. I use a 2020 iMac with 128 Gb RAM, so it >>> should not be a CPU or memory issue. >>> >>> But when using the GainRider plugin from TB Pro Audio I get a little too >>> much latency when I use the look-ahead feature/pre delay setting in the >>> plugin, even when the latency compensation under the Option menu is on. In >>> other DAWs the latency caused when using this feature is easily compensated >>> according to the developer, but in Pro Tools the latency is not totally >>> compensated. This is a drawback caused by PT, the developer tells me. >>> >>> Does anyone know of a setting in PT that has an impact on the latency >>> compensation for the system or for each track? I hope there is a way to set >>> the latency compensation manually for each track…. >>> >>> Any suggestions are welcome! ;) >>> >>> >>> Best, >>> John André >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/952DA8B8-FFFE-4ECD-A807-F094F0217F0D%40a-pro-studio.no. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/05D6540B-2018-4800-821F-80F36FF04633%40gmail.com. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/8AB2F791-D643-41D1-A5E9-202404E45BDB%40a-pro-studio.no. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/A3EEB21B-B868-40B1-A470-A211C1464DA6%40gmail.com.
