Hi, Soon, AccessiblePeakMeter 3 will be released, it will give you audio feedback for the following meters: RMS SL/IL LUFS / EBU ML/SL/IL Peak and True Peak Dynamic Range (DR PDR) DialNorm
and more… It will also have an option to set a different alarm tone for each meter if you would like to have several active at once. More info soon. There is also a handy AccessiblePhaseMeter and AccesibleSpectrumAnalyser available. I’ll post links when the update is released. Some will not like that you have to set a threshold value for the meter, and adjust it as needed, but I think this is a nice way to work, especially if you have a couple of values you aim for when you master your material. If you for example set one meter to alarm when the True Peak reaches -1dB, a different meter to alarm when your LUFS SL reaches -10 db, a different meter to alarm when your LUFS IL reaches -14dB, and finally a meter to alarm when you reach a Dynamic Range DR at 6dB (these are all example values), you can switch between the meters while working, or have a couple of them active at the same time. You might also have one ready to alarm if you have phase issues, and a spectrum analyser set up to easily swipe through the bands to keep an eye on the tonal balance in your material. Just some ideas, though. Best, John André On 14 Aug 2019, at 01:55, Steve Sparrow <[email protected]> wrote: Hi. Doing some mastering in protools. Is there any way that we can see rMS levels using PT. From memory i think this was not doable some time back Is this still the case, and If so is there any spluggin or program on mac that will give us this information. Just to add I’m really impressed with protools 19.6 and the latest Flo tools. I’ve upgraded to mojave and i’d have to say it’s excellent. The i can now run at lower buffer size again when recording with compressors and eq on the tracks. Very nice indeed. A huge thanks from me to the flo tools team for making this version as accessible as it is. Cheers Steve -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/F99D0443-5117-40DC-ADF0-A9AAB50EC730%40sparrowsound.com.au. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/A7CCD526-249F-43C9-A979-ECDF91478C36%40a-pro-studio.no.
