You may want to assign the output of tracks
to an aux track if you are using the aux track as a sub mix, e.g. backing
vocals or drums. Then you can insert plug-ins that will effect all the
tracks assigned to that aux track.
Gord
-----Original Message-----
From: John Gunn
Sent: Tuesday, May 17, 2016 7:49 AM
To: [email protected]
Subject: Re: Aux channel question
Slau,
Thanks for the clarification, good information.
John
On May 16, 2016, at 7:04 AM, Slau Halatyn <[email protected]> wrote:
Hi John,
Language can be quirky so, when you say, "move the sends to the Aux
track," it can be taken a couple of ways. What you want is for both your
audio track and your Aux track to be set to output to your main outs. The
audio track's send should be set to output to the Aux input, usually
through a bus and the Aux track's input source should be set to the same
bus. This can all be done more or less automatically by choosing "New
Track" from the contextual menu when assigning a send. Pro Tools will
assign an available bus and name both the bus and Aux input track by
whatever name you choose and automatically do the routing. the only thing
you'd have to do after the fact is instantiate the desired plug-in on the
track. That's one aspect of the resulting dialog that would be helpful to
include, a means to assign the plug-in right from the same dialog. At any
rate, hopefully, that helps.
Slau
On May 16, 2016, at 7:54 AM, John Gunn <[email protected]> wrote:
Makes perfect sense. So in otherwards routing the sends to the aux
track, the audio will come out of the main outs as well as he aux track.
Thanks for clearing that up and good instructions.
John
On May 15, 2016, at 8:32 AM, TheOreoMonster <[email protected]>
wrote:
use a send to route the original track to the aux track instead of
routing the output of that track to the Aux track. If you use a send to
route to the aux track then audio is sent to the aux track via the send
and to the main outputs via the track outputs. If you change the track
outputs to the the aux track then the track is only being sent to the
AUX and in tern only the aux is being sent to th emits outs Hope this
made sense and wasn’t too confusing.
On May 15, 2016, at 12:03 AM, John Gunn <[email protected]> wrote:
Hello,
I am quite sure it’s user error but I have an aux channel and delay set
for the channel. I route my audio channel to the aux channel but I can’t
hear the original audio track but when I bring up the aux track, I then
hear the audio with the delay.
What I want is to use the original audio track and using the aux track
mix wet and dry being that the delay is on the aux track.
Help and suggestions would be appreciated. Using PT 12.5
John
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
