Hello Bryan, I haven't read any of the replies if any yet, but as a rule of thumb I will keep some of the core instrument tracks at minus 10 or more DB. If you find any other tracks dominating that level then you know that you are pushing things. On top of that I will track Fairley low as well. Are you trying to mix or master with a control surface?
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian Howerton Sent: Tuesday, May 12, 2015 10:40 AM To: [email protected] Subject: question about mixing with a control surface Hello all, Okay, this might sound like a really stupid question, so my apologies right up front. Does anyone have any tips for getting used to mixing with a control surface? Coming to pro tools from Sonar, in Sonar, I would mix totally in the box and use the keyboard to mix my volume adjustments, but I wanted to do the control surface route in pro tools. With my control surface which is the BCF2000, there is no indention on the fader to let me know that I am at unity gain, so just am curious to hear some tips for getting used to mixing with a control surface. When I was trying to set volumes yesterday, I noticed that my volumes were like +3 and up sometimes. Just trying to get used to the whole concept of mixing with a control surface. Thanks for any help or tips, Brian -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
