I had a slight difficulty installing rh8 from CD. after the skip media test, at the time when the install process is about to start probing... after the line: ... PC-Style.... on occation i would get a message: ATAPI reset complete irq error... ... ATAPI reset complete
this was cycling. and the install process stopped moving forward. I rebooted a few times and eventually it worked. does anyone know about these problems.. i have an intel P4 2.4Ghz 533MHz bus with the intel 845PE chipset on a gigabyte main board with 512 Mb of DDR 333Mhz ram. i have a pioneer DVD/cd rom 48/16 and an asus cd wrw. 48/48/16 both connected to the secondary ide bus. two large HDs connected to primary ide bus. i.e. all ide positions are filled. i have things connected to com1 and com2, as well as a pci network card. tried configuring my bios with no real differences to the problem. using an award bios. although i got the install to work eventually... i would like to know if this is a known problem any help would be appreciated. mat. -- Psyche-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/psyche-list
