On Fri, 2003-02-07 at 20:13, Steve Strong wrote: > I work for a school and we've been given an HP Kayak server: > > 2 500 mhz cpu's > 3 9 gig SCSI hard drives > > I can see the cpu's and hard drives in the BIOS, but the installer only > sees one hard drive and I think just one cpu. The SCSI driver is loaded > without error messages during the install. > > Does Red Hat 8.0 Professional support multiple cpu's and SCSI hard > drives? If so, what am I doing wrong and if not, what a bummer! ----- Is there a raid controller on the system? If so, it's possible that the raid configuration created only 1 system drive which is all that would be seen by software...
I would presume that all of the SCSI controllers would show themselves and the methods to invoke the configuration during POST - Many of these systems would have perhaps an Adaptec 78xxx compatible chipset embedded on the motherboard along with a DAC 960 Raid controller in an ISA or PCI slot and the hard drives would be on the Raid controller. Always a good thing to know your hardware first... Craig -- Psyche-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/psyche-list
