Haven't quite figured it out yet When I drop my local firewall (the machine I want to handle all domain email), I can telnet to ports 110 and 143 but not port 25 from the remote machine (the one I want to forward email to the local machine. From another local machine, on my LAN, I CAN telnet to port 25 on the mail server
So at least one problem (at this point I think the only problem) is at the local end I've checked hosts.allow and restarted xinetd I've edited /etc/mail/access and run make I've edited /etc/mail/relay-domains Any other ideas? The fact that I can telnet to ports 110 and 143 from the remote machine (when I drop the firewall) but I can't telnet to port 25 (but I can from another local machine) leads me to believe that my local sendmail config is the problem Please note that I dropped my firewall (the mail gateway is directly attached to my dsl modem - there is no router between to cause problems) and netstat shows sendmail listening on 0.0.0.0:25 >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED]]On Behalf Of Brian Johnson >>Sent: Monday, January 27, 2003 2:13 PM >>To: [EMAIL PROTECTED] >>Subject: Sendmail config >> >> >>Could someone give me some pointers for getting sendmail to forward all >>email (including internal email messages) to another machine over the >>internet? >> >>I've played around with all sorts of settings but can't get it to work >> >>Stock RedHat 8.0 machine at the sending end (RH 7.3 at the receiving end) -- Psyche-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/psyche-list
