On Sun, Nov 10, 2002 at 06:35:35AM +0800, John wrote:
> On Sat, 9 Nov 2002, John Kodis wrote:
> > The chipset includes an sis900 10/100 Ethernet controller.  This is
> > also known as a RealTek 8201.  Any attempt to insmod the sis900 driver
> > fails with a "No such device" error.  The dmesg file reports:
> 
> Folk here will be more interested in the report from
> lspci -v -v

Glad to oblige.  A simple lspci looks correct, as far as I can tell.
It shows:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645DX Host
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 04)
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet 
(rev 91)
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] 
(rev 20)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP 
(rev 01)

The verbose version really is quite voluminous, but if it might help,
here goes:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645DX Host
        Subsystem: Asustek Computer, Inc.: Unknown device 8081
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [c0] AGP version 2.0
                Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: f7000000-f7ffffff
        Prefetchable memory behind bridge: fcf00000-febfffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0

00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller 
(prog-if 10 [OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 8099
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64 (1000ns min, 3000ns max)
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f6800000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fcee0000 [disabled] [size=128K]
        Capabilities: [64] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 
[Master])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 128
        Interrupt: pin ? routed to IRQ 11
        Region 0: [virtual] I/O ports at 01f0
        Region 1: [virtual] I/O ports at 03f4
        Region 2: [virtual] I/O ports at 0170
        Region 3: [virtual] I/O ports at 0374
        Region 4: I/O ports at b400 [size=16]

00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin B routed to IRQ 9
        Region 0: Memory at f5800000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin C routed to IRQ 9
        Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002 (prog-if 
20 [EHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin D routed to IRQ 9
        Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet 
(rev 91)
        Subsystem: Asustek Computer, Inc.: Unknown device 80a7
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 9800 [size=256]
        Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fcec0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
        Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 9400 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] 
(rev 20)
        Subsystem: Digital Equipment Corporation: Unknown device 500a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (5000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 9000 [size=128]
        Region 1: Memory at f3800000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=256K]

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP 
(rev 01) (prog-if 00 [VGA])
        Subsystem: Matrox Graphics, Inc. MGA-G100 Productiva AGP
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
        Region 1: Memory at f7800000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at fcff0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [f0] AGP version 1.0
                Status: RQ=1 SBA+ 64bit- FW- Rate=x1
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

-- 
John Kodis                                    Goddard Space Flight Center
[EMAIL PROTECTED]                      Greenbelt, Maryland, USA
Phone: 301-286-7376                                     Fax: 301-286-1771




Reply via email to