the spectraa router? as far as i know it always comes back w/ 28 holes pretty easy to fix if you don't forget, but somewhat bush league
the 99SE router only uses the board via and i haven't seen it trash the hole size there are 3 candidates for sizes for a given type have you checked all 3 size pairs? mike i think has said this is fixed in P2004 re spectraa Dennis Saputelli Ray Mitchell wrote: > > Hello, > > In my design rules I've specified that all routing vias are to be 20mil > diameter with a 10mil hole. However, the router makes them all 20mil > diameter with a 28mil hole. Nice feature! I know it hasn't always done > this - only sometimes. I only have one design rule for routing via > style. Its scope is "Board" and it is enabled. Am I holding my mouth > right for some routes and wrong for others? > > Ray > > Ray Mitchell > Engineer, Code 2732 > SPAWAR Systems Center > San Diego, CA. 92152 > (619)553-5344 > [EMAIL PROTECTED] > -- _______________________________________________________________________ Integrated Controls, Inc. Tel: 415-647-0480 EXT 107 2851 21st Street Fax: 415-647-3003 San Francisco, CA 94110 www.integratedcontrolsinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
