> I had that one once too. > It turned out to be a not-so-obvious typo in the net and port names that > prevented P99 top correctly link the nets up.
That still happens to me once in awhile. 1 thing I still wish for is a font which better visually defines the difference between 0 & O. Like the old days of the zero with the slash through it. _____________ Brian Guralnick ----- Original Message ----- From: "Leo Potjewijd" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Thursday, March 18, 2004 4:42 AM Subject: Re: [PEDA] 99SE: 2 of every net name? > At 18-03-2004 07:26, Laurie Biddulph wrote: > >I have found this to be caused by the fact that my schematics do not > >correctly link the nets across multiple pages. Check if your scope is set > >to Ports & Net Labels and/or make sure your nets are clearly marked on all > >relevant pages. The overall block diagram using sheets is useful here as well. > > I had that one once too. > It turned out to be a not-so-obvious typo in the net and port names that > prevented P99 top correctly link the nets up. > Found it by checking the 'add sheetnumber to local nets' checkbox in the > synchronizer.... > > > Leo Potjewijd > hardware designer > Integrated Engineering B.V. > > [EMAIL PROTECTED] > +31 20 4620700 > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
