Are you positive it shorted them or did it not connect to either one? The planes are negative, so if you see a full circle for that via on the plane, it isn't connected to anything.
There is a similar bug related to the split plane and a node that lands in the split will not be reported as a disconnect from the net. This will get you because that node is just floating when it should be tied to one side of the split plane. Tony > -----Original Message----- > From: Graham Brown [mailto:[EMAIL PROTECTED] > Sent: Tuesday, December 23, 2003 5:05 PM > To: [EMAIL PROTECTED] > Subject: [PEDA] P99SE drc > > Hi all, merry Christmas, > > I have a board with an internal plane split between +5v and > +30v. I inadvertently placed a via, belonging to the 30v > net, right on the separating line, thereby bridging the two > power nets. P99SE/SP6 did not find this during drc. Is this a > limitation of Protel or of my menu-digging skills? > > Graham Brown > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
