Juha, After you "Compile PCB Project" (under Project menu in schematic editor) you will see a series of tabs along the bottom of the schematic window. Each tab represents a channel. Click on each tab and print.
Regards, Al McGilvra McGilvra Engineering - Electronic Design & Development Services Ph: 517-783-2623 Fax: 517-783-0676 [EMAIL PROTECTED] 3155 Robinson Road Jackson, Michigan 49203 www.mcgilvra.com -----Original Message----- From: Juha Kuusama [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 22, 2003 4:02 AM To: [EMAIL PROTECTED] Subject: [PEDA] How to do flattened printout from a multichannel schematic? Hi, I'm doing my first multichannel design with the DXP. Generally, the feature is great, a real time saver. However, now that it is done I need to do production documents and the Protel way is not exactly industry standard. So, I rather produce regular documentation than educate everyone downstream. So, I'd like to create schematic prints with eight copies of the channel schematic, with sheet one showing Ch1_R1, next sheet showing Ch2_R1 and so on. How? Regards, Juha Kuusama Kuusama Design Tampere, Finland * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
