"Watnoski, Michael" wrote: > > Hi Wolfgang, > > The problem is not merely an offset, but it is not the same size. > It also appears not to be exactly the same, though it seems to have a > similar pattern. > > Michael
IIRC I had a problem with a co-worker's job, where he was working in metric - I think the drill file was not scaled correctly. Try setting Protel to work in inches, then regenerate both Gerber and drill files (and make sure you don't have "Center board on film" checked when generating the Gerbers) If the size is out by a factor of 10, you may have the wrong numeric format selected in the Gerber viewer when you are importing the Gerbers or the drill file. -- Peter Bennett TRIUMF 4004 Wesbrook Mall, Vancouver, BC, Canada GPS and NMEA info and programs: http://vancouver-webpages.com/peter/index.html * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
