At 10:53 AM 3/21/01 +1000, van de Werken, Matthew (DEM, PH) wrote:
>I'm pulling my hair out here - there must be a way of doing this, but I
>can't find it:
Don't pull your hair out. That's an OrCAD procedure.
>I've inherited a board from someone else, with most of the tracks routed
>(I've had to modify it slightly), but all the tracks are missing netlist
>information. Is there a way to update all tracks on the board so they are
>the same net as their immediate connections, or flag an error if a conflict
>occurs?
[Begin William Tell Overture] To the Rescue!
Seriously, this question has got to be the most asked question on this list.
Design/NetlistManager/Menu/Update Free Primitives from Pads. Actually, the
name may be a little different, but you get the idea!
Sometimes running this command does not clear out the error markers. They
should go away if you run a DRC, unless there are real remaining errors.
[Who was that masked stranger?]
[EMAIL PROTECTED]
Abdulrahman Lomax
P.O. Box 690
El Verano, CA 95433
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
