>From the generator.yml I posted do you know why the snmp.yml didn't include that metric? Since the generator.yml has that metric in overrides, shouldn't it be generated?
On Monday, September 30, 2024 at 8:39:30 AM UTC-4 Mitchell Laframboise wrote: > I looked at the sample snmp.yml from Github that I assume is generated > from the default generator.yml and I see that the "raidTotalSize" metric is > included, but when I check my snmp.yml that metric isn't included. So I > edited the snmp.yml to include that metric and now Prometheus is scraping > that data, but the dashboard is still not picking it up. I guess I'm going > to have to ask the Grafana community. > > On Monday, September 30, 2024 at 3:03:00 AM UTC-4 Brian Candler wrote: > >> I can't see what you're looking at, because: >> >> 1. You've shown your generator.yml, but you've not shown the snmp.yml >> output that generator creates. >> 2. You've not said how the output snmp.yml is different from the supplied >> snmp.yml >> 3. You've not said what version of snmp_exporter you're using, so I can't >> look at the supplied snmp.yml. >> >> Have you tried using *exactly* the same synology section in your >> generator.yml as in the supplied generator.yml, and then comparing the >> snmp.yml output? >> >> Are you getting any errors or warnings from generator when you run it? If >> so, maybe you've not got the correct versions of MIBs available. The >> Makefile in the generator directory shows where it downloads them from when >> building the default MIBs. >> >> On Monday 30 September 2024 at 03:20:32 UTC+1 Mitchell Laframboise wrote: >> >>> Hi. I'm having issues with another metric. raidTotalSize >>> >>> its in the default generator.yml under the synology module in overrides >>> but when I generate the snmp.yml it doesn't put the metric in there??? I >>> can't figure out why >>> >>> Here is my generator.yml file >>> >>> --- >>> auths: >>> public_v1: >>> version: 1 >>> public_v2: >>> version: 2 >>> >>> modules: >>> # Default IF-MIB interfaces table with ifIndex. >>> if_mib: >>> walk: [sysUpTime, interfaces, ifXTable] >>> >>> lookups: >>> - source_indexes: [ifIndex] >>> lookup: ifAlias >>> - source_indexes: [ifIndex] >>> # Uis OID to avoid conflict with PaloAlto PAN-COMMON-MIB. >>> lookup: 1.3.6.1.2.1.2.2.1.2 # ifDescr >>> - source_indexes: [ifIndex] >>> # Use OID to avoid conflict with Netscaler NS-ROOT-MIB. >>> lookup: 1.3.6.1.2.1.31.1.1.1.1 # ifName >>> overrides: >>> ifAlias: >>> ignore: true # Lookup metric >>> ifDescr: >>> ignore: true # Lookup metric >>> ifName: >>> ignore: true # Lookup metric >>> ifType: >>> type: EnumAsInfo >>> # Synology >>> # >>> # Synology MIBs can be found here: >>> # http://www.synology.com/support/snmp_mib.php >>> # >>> http://dedl.synology.com/download/Document/MIBGuide/Synology_MIB_File.zip >>> # >>> # Tested on RS2414rp+ NAS >>> # >>> synology: >>> walk: >>> - 1.3.6.1.4.1.6574.1 # synoSystem >>> - 1.3.6.1.4.1.6574.2 # synoDisk >>> - 1.3.6.1.4.1.6574.3 # synoRaid >>> - 1.3.6.1.4.1.6574.4 # synoUPS >>> - 1.3.6.1.4.1.6574.5 # synologyDiskSMART >>> - 1.3.6.1.4.1.6574.6 # synologyService >>> - 1.3.6.1.4.1.6574.101 # storageIO >>> - 1.3.6.1.4.1.6574.102 # spaceIO >>> - 1.3.6.1.4.1.6574.104 # synologyiSCSILUN >>> lookups: >>> - source_indexes: [spaceIOIndex] >>> lookup: spaceIODevice >>> drop_source_indexes: true >>> - source_indexes: [storageIOIndex] >>> lookup: storageIODevice >>> drop_source_indexes: true >>> - source_indexes: [serviceInfoIndex] >>> lookup: serviceName >>> drop_source_indexes: true >>> - source_indexes: [diskIndex] >>> lookup: diskID >>> drop_source_indexes: true >>> - source_indexes: [raidIndex] >>> lookup: raidName >>> drop_source_indexes: true >>> overrides: >>> diskModel: >>> type: DisplayString >>> diskSMARTAttrName: >>> type: DisplayString >>> diskSMARTAttrStatus: >>> type: DisplayString >>> diskSMARTInfoDevName: >>> type: DisplayString >>> diskType: >>> type: DisplayString >>> modelName: >>> type: DisplayString >>> raidFreeSize: >>> type: gauge >>> raidName: >>> type: DisplayString >>> raidTotalSize: >>> type: gauge >>> serialNumber: >>> type: DisplayString >>> serviceName: >>> type: DisplayString >>> version: >>> type: DisplayString >>> >>> # UCD-SNMP-MIB >>> # >>> # University of California, Davis extensions. Commonly used for host >>> # metrics. For example, Linux-based systems, DD-WRT, Synology, >>> # Mikrotik, Kemp LoadMaster, etc. >>> # >>> # http://www.net-snmp.org/docs/mibs/UCD-SNMP-MIB.txt >>> # >>> ucd_la_table: >>> walk: >>> - 1.3.6.1.4.1.2021.10.1.2 # laNames >>> - 1.3.6.1.4.1.2021.10.1.5 # laLoadInt >>> - 1.3.6.1.4.1.2021.10.1.6 # laLoadFloat >>> lookups: >>> - source_indexes: [laIndex] >>> lookup: laNames >>> drop_source_indexes: true >>> ucd_memory: >>> walk: >>> - 1.3.6.1.4.1.2021.4 # memory >>> ucd_system_stats: >>> walk: >>> - 1.3.6.1.4.1.2021.11 # systemStats >>> >>> any help would be appreciated. >>> >>> Thanks, >>> >>> >>> On Sunday, September 29, 2024 at 4:44:02 PM UTC-4 Mitchell Laframboise >>> wrote: >>> >>>> Thanks for your reply. I was using the default generator.yml which >>>> lists an override of ifName and ignore was set to "true" I removed those >>>> lines before generating the snmp.yml and was able to query ifName. >>>> >>>> Thank you! >>>> >>>> On Sunday, September 29, 2024 at 4:17:09 PM UTC-4 Brian Candler wrote: >>>> >>>>> > I am successful in querying the metrics in Prometheus >>>>> >>>>> Which ones in particular *are* you able to see? >>>>> >>>>> > I did some more queries and found that I'm unable to return ifName? >>>>> >>>>> Please explain exactly what you're doing when you say "unable to >>>>> return". If you're going to the Prometheus web interface (usually at >>>>> x.x.x.x:9090) and entering "ifName" as the query and hitting Enter, and >>>>> getting no results, then it seems like you're not successfully scraping >>>>> the >>>>> if_mib from any targets. However if you're getting some other metrics >>>>> like >>>>> ifHCInOctets from the if_mib, then maybe the way you built snmp.yml from >>>>> generator.yml is broken. >>>>> >>>>> You'll need to work out what's happening. In the same Prometheus web >>>>> interface go to Status > Targets as a starting point. If it says the >>>>> target >>>>> is "up" then try doing exactly the same scrape manually: >>>>> curl -v 'x.x.x.x:9116/snmp?target=y.y.y.y&module=zzzz&auth=aaaa' >>>>> >>>>> and/or point a web browser at x.x.x.x:9116/snmp/status as I suggested >>>>> before. Also look at snmp_exporter's stdout ("systemctl status >>>>> snmp_exporter" if you're running it under systemd). >>>>> >>>>> Basically, you need to divide and conquer. If ifName not being >>>>> returned from any targets, then is it a problem with your snmp.yml, or >>>>> with >>>>> your prometheus scrape config, or something else? You haven't shown your >>>>> scrape config, so the problem could be there. You also haven't shown the >>>>> snmp.yml which came from your generator.yml. >>>>> >>>>> On Sunday 29 September 2024 at 14:40:33 UTC+1 Mitchell Laframboise >>>>> wrote: >>>>> >>>>>> Hi there, >>>>>> >>>>>> I did some more queries and found that I'm unable to return >>>>>> ifName? Im walking that specific OID so I don't understand? >>>>>> >>>>>> Can you help >>>>>> >>>>>> On Sunday, September 29, 2024 at 9:23:37 AM UTC-4 Mitchell >>>>>> Laframboise wrote: >>>>>> >>>>>>> Thanks Brian. I am successful in querying the metrics in >>>>>>> Prometheus, so I will check out the Grafana community for support. >>>>>>> >>>>>>> On Sunday, September 29, 2024 at 9:03:12 AM UTC-4 Brian Candler >>>>>>> wrote: >>>>>>> >>>>>>>> First, do a query in the Prometheus web interface (for example, >>>>>>>> just "ifPhysAddress"). If you see no answers, then you need to drill >>>>>>>> down >>>>>>>> into your metrics collection. Check the query "up" to see if SNMP >>>>>>>> scraping >>>>>>>> is successful. If it's not, then check logs from snmp_exporter >>>>>>>> ("journalctl >>>>>>>> -eu snmp_exporter), or use the test web interface at >>>>>>>> <your-snmp-exporter>:9116/snmp/status >>>>>>>> >>>>>>>> If the metrics collection into Prometheus is working, meaning that >>>>>>>> you have a problem with Grafana, then please seek Grafana support from >>>>>>>> the Grafana >>>>>>>> Community <https://community.grafana.com/>. >>>>>>>> >>>>>>>> On Sunday 29 September 2024 at 13:57:12 UTC+1 Mitchell Laframboise >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Good morning group, I have only some of this public dashboard >>>>>>>>> working and I'm wondering how to get the rest up and running. I am >>>>>>>>> starting with the interface. Its showing no data, so I was hoping >>>>>>>>> someone >>>>>>>>> could point me in the right direction. I've attached a screenshot of >>>>>>>>> the >>>>>>>>> queries for the dashboard and my generator.yml so you can see if I >>>>>>>>> have >>>>>>>>> this set up correctly. >>>>>>>>> >>>>>>>>> --- >>>>>>>>> auths: >>>>>>>>> public_v1: >>>>>>>>> version: 1 >>>>>>>>> public_v2: >>>>>>>>> version: 2 >>>>>>>>> >>>>>>>>> modules: >>>>>>>>> # Default IF-MIB interfaces table with ifIndex. >>>>>>>>> if_mib: >>>>>>>>> walk: [sysUpTime, 1.3.6.1.2.1.2.2, 1.3.6.1.2.1.31.1.1] >>>>>>>>> lookups: >>>>>>>>> - source_indexes: [ifIndex] >>>>>>>>> lookup: ifAlias >>>>>>>>> - source_indexes: [ifIndex] >>>>>>>>> # Uis OID to avoid conflict with PaloAlto PAN-COMMON-MIB. >>>>>>>>> lookup: 1.3.6.1.2.1.2.2.1.2 # ifDescr >>>>>>>>> - source_indexes: [ifIndex] >>>>>>>>> # Use OID to avoid conflict with Netscaler NS-ROOT-MIB. >>>>>>>>> lookup: 1.3.6.1.2.1.31.1.1.1.1 # ifName >>>>>>>>> overrides: >>>>>>>>> ifAlias: >>>>>>>>> ignore: true # Lookup metric >>>>>>>>> ifDescr: >>>>>>>>> ignore: true # Lookup metric >>>>>>>>> ifName: >>>>>>>>> ignore: true # Lookup metric >>>>>>>>> ifType: >>>>>>>>> type: EnumAsInfo >>>>>>>>> # Default IP-MIB with ipv4InterfaceTable for example. >>>>>>>>> ip_mib: >>>>>>>>> walk: [ipv4InterfaceTable] >>>>>>>>> >>>>>>>>> readynas: >>>>>>>>> walk: >>>>>>>>> - 1.3.6.1.4.1.4526 # Raid/Disks status >>>>>>>>> >>>>>>>>> # Synology >>>>>>>>> # >>>>>>>>> # Synology MIBs can be found here: >>>>>>>>> # http://www.synology.com/support/snmp_mib.php >>>>>>>>> # >>>>>>>>> http://dedl.synology.com/download/Document/MIBGuide/Synology_MIB_File.zip >>>>>>>>> # >>>>>>>>> # Tested on RS2414rp+ NAS >>>>>>>>> # >>>>>>>>> synology: >>>>>>>>> walk: >>>>>>>>> - 1.3.6.1.4.1.6574.1 # synoSystem >>>>>>>>> - 1.3.6.1.4.1.6574.2 # synoDisk >>>>>>>>> - 1.3.6.1.4.1.6574.3 # synoRaid >>>>>>>>> - 1.3.6.1.4.1.6574.4 # synoUPS >>>>>>>>> - 1.3.6.1.4.1.6574.5 # synologyDiskSMART >>>>>>>>> - 1.3.6.1.4.1.6574.6 # synologyService >>>>>>>>> - 1.3.6.1.4.1.6574.101 # storageIO >>>>>>>>> - 1.3.6.1.4.1.6574.102 # spaceIO >>>>>>>>> - 1.3.6.1.4.1.6574.104 # synologyiSCSILUN >>>>>>>>> - 1.3.6.1.4.1.6574.3.1 # raid table >>>>>>>>> lookups: >>>>>>>>> - source_indexes: [spaceIOIndex] >>>>>>>>> lookup: spaceIODevice >>>>>>>>> drop_source_indexes: true >>>>>>>>> - source_indexes: [storageIOIndex] >>>>>>>>> lookup: storageIODevice >>>>>>>>> drop_source_indexes: true >>>>>>>>> - source_indexes: [serviceInfoIndex] >>>>>>>>> lookup: serviceName >>>>>>>>> drop_source_indexes: true >>>>>>>>> - source_indexes: [diskIndex] >>>>>>>>> lookup: diskID >>>>>>>>> drop_source_indexes: true >>>>>>>>> - source_indexes: [raidIndex] >>>>>>>>> lookup: raidName >>>>>>>>> drop_source_indexes: true >>>>>>>>> overrides: >>>>>>>>> diskModel: >>>>>>>>> type: DisplayString >>>>>>>>> diskSMARTAttrName: >>>>>>>>> type: DisplayString >>>>>>>>> diskSMARTAttrStatus: >>>>>>>>> type: DisplayString >>>>>>>>> diskSMARTInfoDevName: >>>>>>>>> type: DisplayString >>>>>>>>> diskType: >>>>>>>>> type: DisplayString >>>>>>>>> modelName: >>>>>>>>> type: DisplayString >>>>>>>>> raidFreeSize: >>>>>>>>> type: gauge >>>>>>>>> raidName: >>>>>>>>> type: DisplayString >>>>>>>>> raidTotalSize: >>>>>>>>> type: gauge >>>>>>>>> serialNumber: >>>>>>>>> type: DisplayString >>>>>>>>> serviceName: >>>>>>>>> type: DisplayString >>>>>>>>> version: >>>>>>>>> type: DisplayString >>>>>>>>> >>>>>>>>> # UCD-SNMP-MIB >>>>>>>>> # >>>>>>>>> # University of California, Davis extensions. Commonly used for >>>>>>>>> host >>>>>>>>> # metrics. For example, Linux-based systems, DD-WRT, Synology, >>>>>>>>> # Mikrotik, Kemp LoadMaster, etc. >>>>>>>>> # >>>>>>>>> # http://www.net-snmp.org/docs/mibs/UCD-SNMP-MIB.txt >>>>>>>>> # >>>>>>>>> ucd_la_table: >>>>>>>>> walk: >>>>>>>>> - 1.3.6.1.4.1.2021.10.1.2 # laNames >>>>>>>>> - 1.3.6.1.4.1.2021.10.1.5 # laLoadInt >>>>>>>>> - 1.3.6.1.4.1.2021.10.1.6 # laLoadFloat >>>>>>>>> lookups: >>>>>>>>> - source_indexes: [laIndex] >>>>>>>>> lookup: laNames >>>>>>>>> drop_source_indexes: true >>>>>>>>> ucd_memory: >>>>>>>>> walk: >>>>>>>>> - 1.3.6.1.4.1.2021.4 # memory >>>>>>>>> ucd_system_stats: >>>>>>>>> walk: >>>>>>>>> - 1.3.6.1.4.1.2021.11 # systemStats >>>>>>>>> >>>>>>>>> >>>>>>>>> Any help would be greatly appreciated! >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> >>>>>>>>> [image: Grafana Dashboard NAS.png] >>>>>>>>> >>>>>>>>> -- You received this message because you are subscribed to the Google Groups "Prometheus Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to prometheus-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/prometheus-users/6f2a95f1-deeb-45c1-bb9c-0b1bebc66528n%40googlegroups.com.
