How long do you have before you   NEED  to have the PC   working ???

I ask that as I will send you   most likely what you need to fix it  !!!

-----Original Message-----
From: profoxtech-boun...@leafe.com [mailto:profoxtech-boun...@leafe.com] On
Behalf Of Kurt Wendt
Sent: Tuesday, February 16, 2010 1:02 PM
To: profoxt...@leafe.com
Subject: RE: [NF] Woe is ME with My DEAD PC...

Peter - thanks for your extensive reply - as well as to all the others
who have given me input on this problem. So, to follow up on what I
tried this weekend...

-----Original Message-----
From: profoxtech-boun...@leafe.com [mailto:profoxtech-boun...@leafe.com]
On Behalf Of Peter Hart
Sent: Saturday, February 13, 2010 8:32 AM

>Hi Kurt
>Tried to reply to message sent to my support email address but message
>could not be delivered.

Not sure what happened with that Peter. Although, at my job here - tons
of things are blocked going out - and maybe your e-mail was blocked
coming in! Although, I did CC: that message to my home e-mail, and if
you did try doing a reply via Reply To All - the message should have at
least come thru to my home e-mail. Oh well...


>First of all my experience
>Electronics from 58 to 83 when I turned my attention to Computers.
>I am a qualified computer engineer...

        You are Obviously way more of a HW techy than myself - I'm more
of an amateur at the HW stuff - although I am not afraid to get my hands
dirty on it - which is obvious since I built 3 of my own PC's in the
past decade or so. But, once things go bad - then it becomes a little
more complicated for me...

> I am not an amateur,  although the same can't be said of my FoxPro
> Programming/grin

        Thanks for that chuckle!

>Now to your problem.
>I understand that you have other Computers available which are working.

        Well - that's not completely true. My prior workstation is also
sitting dead - and I haven't tried resuscitating it in a long time!
Although, that being said - I think it may be time to also get that
prior PC running again - and make it available to my son (as he has my
wife's old hand-me-down Dell at 600Mhz - which is FAR slower that my
older dead 2.8Ghz or so PC). But, bringing that older PC back to life
isn't as important as my current system. So - onwards...


>My first line of diagnosis would be to se a power supply tester but as
>this is not available I would take out the suspect Power Supply and
plug
>it into a working computer.  It is not necessary to unplug...
>Cheers
>Peter

That doesn't look like an easy option - since I think the power supply
came with the case - as it's a fancier Antec case - and the wiring from
the power supply looks to be kind of integrated into the case. Anyway -
I shall just relate what I tried so far...

I pulled the Fan/Heatsink combo off the CPU. I cleaned off the Heatsink
and the top of the chip - of the old "epoxy"/heat transfer paste (don't
know the official name of the stuff). I then put on some new "epoxy"
stuff (although its not 'new' - as the tube is old - but, I figured it
would still do the job) and put the Heatsink/Fan back on top - after
first cleaning off a lot of dust in the Fan. 

It was interesting - because - while I left everything else disconnected
(video cable, keyboard, etc.) and just plugged in the power - I turned
it on - and the fans in the system stayed on for an extended period. At
that point - I shut the power off - and then tried powering it back on
again. But, at the 2nd attempt - it went BACK to the old ways - of the
fans coming on for a second or less - then just shutting off.

At this point - I am wondering if I should just go out and get a new CPU
and HeatSink/Fan. 

Or - should I first just try that switching to another Power supply
(trying to take the one from my other Dead PC)?

TIA,
-K-

[excessive quoting removed by server]

_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://leafe.com/mailman/listinfo/profox
OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: 
http://leafe.com/archives/byMID/profox/001701caaf69$d4b132d0$7e1398...@com
** All postings, unless explicitly stated otherwise, are the opinions of the 
author, and do not constitute legal or medical advice. This statement is added 
to the messages for those lawyers who are too stupid to see the obvious.

Reply via email to