Glad you got it working. Just to be clear though. The easiest way to see if you have any tables in your DE is to open the DE, then in the Properties dialog, click on the drop down link and see if there is anything under the DE called (usually) Cursor1, etc.
Kurt Wendt wrote: > OK - I guess so. In the end, I attempted to do as you suggested(or what > I thought your suggestion was) - and scrolled around in the Data Env > window looking for any DBF's in there - but, as far as I could tell - > there were none. > > However, for the final solution - I did my other suggestion - and copied > a Report form/"Label" that DID work and didn't have the problem - and I > built back into any missing content needed - and literally copied it > from the label with the problem. And, luckily - everything worked and > now its done! > > And - BEST OF ALL - I can finally have my desk space back - which was > taken up by this Oversized label printer!!! > > :-) > -K- > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Frank Cazabon > Sent: Friday, August 21, 2009 10:00 AM > To: [email protected] > Subject: Re: Reort Form - Trying to Open a DBF... > > What you said was: > > "there was a > setting in the InitialSelectedAlias of the DataEnvironment - which had > that old DBF name - and I had already reset that to "None"." > > This is not the same as removing the table from the dataenvironment. > You could still have the table there. > > > > Kurt Wendt wrote: > >> I already mentioned earlier that I checked in the Environ - and I had >> actually already removed the DBF reference. So - no - that's not it... >> >> K >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] >> On Behalf Of Frank Cazabon >> Sent: Friday, August 21, 2009 8:52 AM >> >> Kurt Wendt wrote: >> >> >>> However, now - when I try to Preview or Print the report form - it >>> now >>> >>> >> >> >>> brings up the "Open" dialog box asking me to go pick a DBF - even >>> though a DBF is already open in the current Work Area. If, while I >>> still have the report form open in Modify mode - and I attempt a 2nd >>> time to Preview the report - it WILL actually work! >>> >>> >>> >> Could it be that there is still a table in the dataenvironment which >> can't be found when the report first opens up? Maybe it's not visible >> > > >> when you edit the data environment? When in th edataenvironment, >> check the properties and see if there is a cursor in there. >> >> > > -- Frank. Frank Cazabon Samaan Systems Ltd. - Developing Solutions www.SamaanSystems.com/ Referrals are important to us. If you know of anyone who would benefit from our services, please contact me. We would appreciate the opportunity to work with them. _______________________________________________ Post Messages to: [email protected] Subscription Maintenance: http://leafe.com/mailman/listinfo/profox OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech Searchable Archive: http://leafe.com/archives/search/profox This message: http://leafe.com/archives/byMID/profox/[email protected] ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
