Sorry, first mesage i sent seem encrypted when I tried to view it on the maillist https://marc.info/?l=openbsd-ppc&m=168105764025340&w=2
After a (what it seems) successful install (7.2) I do not get pass this: > ... > softraid0 at root > scsibus3 at softraid0: 256 targets > uhub1: illegal enable change, port 1 > root on sd0a (2ba37c8f5f16a5ad.a) swap on sd0b dump on sd0b The previous times, I installed openbsd 7.2, it worked as expected, the reason why I'm reinstalling it, is because I so far was using this machine for testing purposes, I only had one nvme which I was switching from openbsd to debian. I was testing AMD cards trying to find one that would work. The way I do the installation and would connect to it was through the serial console, or openbmc. I posted it on reddit as well: https://www.reddit.com/r/openbsd/comments/12elua4/powerpc64_talos_ii_first_boot_after_install/ that is all I get after I initiate openbsd from petitboot: ******************************************************************** SIGTERM received, booting... [ 23.605469] kexec_core: Starting new kernel >> OpenBSD/powerpc64 BOOT 0.2 probing disks available root devices: sd0 boot> NOTE: random seed is being reused. booting sd0a:/bsd Hello, World! [ using 11657968 bytes of initrd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.2 (GENERIC.MP) #920: Tue Sep 27 13:32:35 MDT 2022 dera...@powerpc64.openbsd.org:/usr/src/sys/arch/powerpc64/compile/GENERIC.MP real mem = 137438953472 (131072MB) avail mem = 130712006656 (124656MB) random: boothowto does not indicate good seed mainbus0 at root: T2P9S01 REV 1.01 cpu0 at mainbus0 pir 4: IBM POWER9 2.3, 2700 MHz cpu0: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu0: 512KB 128b/line 8-way L2 cache cpu0: 10MB 128b/line 8-way L3 cache cpu1 at mainbus0 pir c: IBM POWER9 2.3, 2700 MHz cpu1: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu1: 512KB 128b/line 8-way L2 cache cpu1: 10MB 128b/line 8-way L3 cache[ 8556.053449291,3] OPAL: CPU not active in OPAL ! failed to identify cpu2 at mainbus0 pir 14: IBM POWER9 2.3, 2700 MHz cpu2: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu2: 512KB 128b/line 8-way L2 cache cpu2: 10MB 128b/line 8-way L3 cache cpu3 at mainbus0 pir 1c: IBM POWER9 2.3, 2700 MHz cpu3: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu3: 512KB 128b/line 8-way L2 cache cpu3: 10MB 128b/line 8-way L3 cache cpu4 at mainbus0 pir 804: IBM POWER9 2.3, 2700 MHz cpu4: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu4: 512KB 128b/line 8-way L2 cache cpu4: 10MB 128b/line 8-way L3 cache cpu5 at mainbus0 pir 80c: IBM POWER9 2.3, 2700 MHz cpu5: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu5: 512KB 128b/line 8-way L2 cache cpu5: 10MB 128b/line 8-way L3 cache cpu6 at mainbus0 pir 824: IBM POWER9 2.3, 2700 MHz cpu6: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu6: 512KB 128b/line 8-way L2 cache cpu6: 10MB 128b/line 8-way L3 cache cpu7 at mainbus0 pir 82c: IBM POWER9 2.3, 2700 MHz cpu7: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache cpu7: 512KB 128b/line 8-way L2 cache cpu7: 10MB 128b/line 8-way L3 cache "bmc" at mainbus0 not configured "ibm,firmware-versions" at mainbus0 not configured "ibm,hostboot" at mainbus0 not configured opal0 at mainbus0: skiboot-9858186 opal0: idle psscr 300332 [ 8566.060016341,3] OPAL: CPU not active in OPAL ! [ 8566.060065723,3] OPAL: CPU not active in OPAL ! [ 8566.060096675,3] OPAL: CPU not active in OPAL ! opalcons0 at opal0 opalsens0 at opal0: "core-temp" opalsens1 at opal0: "core-temp" opalsens2 at opal0: "core-temp" opalsens3 at opal0: "core-temp" opalsens4 at opal0: "core-temp" opalsens5 at opal0: "core-temp" opalsens6 at opal0: "core-temp" opalsens7 at opal0: "mem-temp" opalsens8 at opal0: "mem-temp" opalsens9 at opal0: "mem-temp" opalsens10 at opal0: "mem-temp" opalsens11 at opal0: "mem-temp" opalsens12 at opal0: "mem-temp" opalsens13 at opal0: "mem-temp" opalsens14 at opal0: "mem-temp" opalsens15 at opal0: "mem-temp" opalsens16 at opal0: "mem-temp" opalsens17 at opal0: "mem-temp" opalsens18 at opal0: "mem-temp" opalsens19 at opal0: "mem-temp" opalsens20 at opal0: "mem-temp" opalsens21 at opal0: "mem-temp" opalsens22 at opal0: "mem-temp" opalsens23 at opal0: "mem-temp" opalsens24 at opal0: "mem-temp" opalsens25 at opal0: "mem-temp" opalsens26 at opal0: "mem-temp" opalsens27 at opal0: "mem-temp" opalsens28 at opal0: "mem-temp" opalsens29 at opal0: "mem-temp" opalsens30 at opal0: "mem-temp" opalsens31 at opal0: "mem-temp" opalsens32 at opal0: "mem-temp" opalsens33 at opal0: "mem-temp" opalsens34 at opal0: "mem-temp" opalsens35 at opal0: "mem-temp" opalsens36 at opal0: "mem-temp" opalsens37 at opal0: "mem-temp" opalsens38 at opal0: "mem-temp" opalsens39 at opal0: "proc-energy" opalsens40 at opal0: "proc-energy" opalsens41 at opal0: "proc-energy" opalsens42 at opal0: "proc-energy" opalsens43 at opal0: "proc-energy" opalsens44 at opal0: "proc-energy" opalsens45 at opal0: "proc-in" opalsens46 at opal0: "proc-in" opalsens47 at opal0: "proc-in" opalsens48 at opal0: "proc-in" opalsens49 at opal0: "proc-power" opalsens50 at opal0: "proc-power" opalsens51 at opal0: "proc-power" opalsens52 at opal0: "proc-power" opalsens53 at opal0: "proc-power" opalsens54 at opal0: "proc-power" opalsens55 at opal0: "proc-temp" opalsens56 at opal0: "proc-temp" opalsens57 at opal0: "vrm-curr" opalsens58 at opal0: "vrm-curr" opalsens59 at opal0: "vrm-curr" opalsens60 at opal0: "vrm-curr" opalsens61 at opal0: "vrm-in" opalsens62 at opal0: "vrm-in" opalsens63 at opal0: "vrm-in" opalsens64 at opal0: "vrm-in" opalsens65 at opal0: "vrm-temp" opalsens66 at opal0: "vrm-temp" ipmi0 at opal0: version 2.0 interface OPAL "ibm,pcie-slots" at mainbus0 not configured "ibm,secureboot" at mainbus0 not configured "imc-counters" at mainbus0 not configured xics0 at mainbus0 xive0 at mainbus0 "ipl-params" at mainbus0 not configured "lpcm-opb" at mainbus0 not configured phb0 at mainbus0: chip 0x0 pci0 at phb0 ppb0 at pci0 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci1 at ppb0 bus 1 nvme0 at pci1 dev 0 function 0 "Samsung PM9A1 NVMe" rev 0x00: msix, NVMe 1.3 nvme0: Samsung 980 PRO with Heatsink 2TB, firmware 3B2QGXA7, serial S6WRNJ0RA24719K scsibus0 at nvme0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <NVMe, Samsung 980 PRO, 3B2Q> sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors phb1 at mainbus0: chip 0x0 pci2 at phb1 ppb1 at pci2 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci3 at ppb1 bus 1 phb2 at mainbus0: chip 0x0 pci4 at phb2 ppb2 at pci4 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci5 at ppb2 bus 1 phb3 at mainbus0: chip 0x0 pci6 at phb3 ppb3 at pci6 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci7 at ppb3 bus 1 xhci0 at pci7 dev 0 function 0 "TI xHCI" rev 0x02: msi, xHCI 0.96 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "TI xHCI root hub" rev 3.00/1.00 addr 1 phb4 at mainbus0: chip 0x0 pci8 at phb4 ppb4 at pci8 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci9 at ppb4 bus 1 bge0 at pci9 dev 0 function 0 "Broadcom BCM5719" rev 0x00, BCM5719 A1 (0x5719001), APE firmware NCSI 0.6.0.18: msi, address 2c:09:4d:00:08:cb brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0 bge1 at pci9 dev 0 function 1 "Broadcom BCM5719" rev 0x00, BCM5719 A1 (0x5719001), APE firmware NCSI 0.6.0.18: msi, address 2c:09:4d:00:08:cc brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0 phb5 at mainbus0: chip 0x0 pci10 at phb5 ppb5 at pci10 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci11 at ppb5 bus 1 ppb6 at pci11 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x04 pci12 at ppb6 bus 2 astfb0 at pci12 dev 0 function 0 "ASPEED Technology AST2000" rev 0x41: can't map framebuffer phb6 at mainbus0: chip 0x8 pci13 at phb6 ppb7 at pci13 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci14 at ppb7 bus 1 phb7 at mainbus0: chip 0x8 pci15 at phb7 ppb8 at pci15 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci16 at ppb8 bus 1 phb8 at mainbus0: chip 0x8 pci17 at phb8 ppb9 at pci17 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci18 at ppb9 bus 1 phb9 at mainbus0: chip 0x8 pci19 at phb9 ppb10 at pci19 dev 0 function 0 "IBM POWER9 Host" rev 0x00 pci20 at ppb10 bus 1 "psi" at mainbus0 not configured "psi" at mainbus0 not configured "vas" at mainbus0 not configured "vas" at mainbus0 not configured "vpd" at mainbus0 not configured "xscom" at mainbus0 not configured "xscom" at mainbus0 not configured uhub1 at uhub0 port 3 configuration 1 interface 0 "Aspeed USB Virtual Hub" rev 2.00/1.00 addr 2 uhidev0 at uhub1 port 1 configuration 1 interface 0 "OpenBMC virtual_input" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0 mux 1 uhidev1 at uhub1 port 1 configuration 1 interface 1 "OpenBMC virtual_input" rev 2.00/1.00 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons wsmouse0 at ums0 mux 0 uhub2 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 4 umass0 at uhub0 port 5 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 3.20/1.00 addr 5 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.078155a38107c1aaa134 sd1: 29340MB, 512 bytes/sector, 60088320 sectors vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets uhub1: illegal enable change, port 1 root on sd0a (2ba37c8f5f16a5ad.a) swap on sd0b dump on sd0b ******************************************************************* if anyone has any idea that I could try out, I'd appreciate. thanks.
