I have just been handed a PowerBook G4 3.5 with no OS. I am attempting to install the latest snapshot as of June 13. The install from CDROM completes and it syncs time, so I know that it has working Ethernet connectivity.
During boot after install, it hangs. The last lines the kernel prints are: bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd root on wd0a (d857303cb8fe2d43.a) swap on wd0b dump on wd0b initializing kernel modesetting (RV250 0x1002:0x4C66 0X1002:0X4C66 0X01). [drm] *ERROR* Unable to locate a BIOS ROM radeon_cp: Failed to load firmware "radeon/R200_cp.bin" [drm] *ERROR* Failed to load firmware! drm:pid0:r100_startup *ERROR* failed initializing CP (-2) drm:pid:r100_init *ERROR* Disabling GPU acceleration There is no IP connectivity at this point, so I don't seem to have any way to poke around in the machine. There is no built-in serial, and even if I used a Serial/USB adapter, I don't know if it would be recognized let alone spin up a tty. What additional information can I provide or what should I attempt next? Link to picture of screen after freeze: https://photos.app.goo.gl/29irzpAygf3n9koG9 Thanks in advance for any help
