I am looking for some help. I have OpenBSD 6.0 install on my PowerBook G4.
I installed the XFCE package however when I run 'startxfce4' Xorg fails to
start. I see the following errors in the Xorg.0.log.
# cat /var/log/Xorg.0.log |grep -e WW -e EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1408.921] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 1408.937] (EE) NV(0): pci_device_map_range failed: Invalid argument
[ 1408.938] (EE) Segmentation fault at address 0x4
[ 1408.939] (EE)
[ 1408.939] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1408.940] (EE)
[ 1408.941] (EE)
[ 1408.942] (EE) Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[ 1408.942] (EE)
[ 1408.946] (EE) Server terminated with error (1). Closing log file.
I did find a link where this issue was discussed *here
<http://misc.openbsd.narkive.com/d6drr7IN/current-macppc-on-a-powerbook6-1>*.
It suggest setting to ttyC0 off in /etc/ttys. However that did not work for
me and I saw in the xenocara release notes for 5.8 that I should no longer
need to do this on macppc. Below is my dmesg. Has anyone been able to get
this to work?
Thanks!
Herminio
# dmesg
[ using 694220 bytes of bsd ELF symbol table ]
console out [NVDA,Display-A] console in [keyboard], using ADB
using parent NVDA,Parent:: memaddr 94000000, size 4000000 : consaddr
94004000 : ioaddr 91000000, size 1000000: width 1024 linebytes 1024 height
768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 6.0 (GENERIC) #1097: Tue Jul 26 18:22:06 MDT 2016
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1207959552 (1152MB)
avail mem = 1152307200 (1098MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerBook6,1
cpu0 at mainbus0: 7455 (Revision 0x303): 533 MHz: 256KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: no EEPROM found
spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
admtmp0 at iic0 addr 0xac
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
agp at pchb0 not configured
vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce4 440 Go 64M" rev 0xa3, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio4" at macgpio0 offset 0x1e not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio4" at macgpio0 offset 0x5c not configured
"gpio11" at macgpio0 offset 0x75 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
snapper0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets
apm0 at adb0: battery flags 0x5, 99% charged
piic0 at adb0
iic1 at piic0
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
"battery" at macobio0 offset 0x0 not configured
"backlight" at macobio0 offset 0xf300 not configured
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, CD-RW CW-8122, BA21> ATAPI 5/cdrom
removable
cd0(wdc0:0:0): using BIOS timings, DMA mode 2
audio0 at snapper0
bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address
00:0d:93:e9:9e:00
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 27,
version 1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 28,
version 1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci2: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <OWC Aura Pro 3G SSD>
wd0: 1-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41,
address 00:0a:95:7c:b3:5c
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
ugen0 at uhub0 port 2 "Apple Computer product 0x8203" rev 1.10/5.26 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (79102c408f00b6ee.a) swap on wd0b dump on wd0b
