Hello,
here is the board info:
Board Info:
Board type: 600
Serial number: 160201FCF843
Firmware version: 2.11
CPU frequency: 400 MHz
Memory size: 64 MB
and here is info about CF used:
Model: SanDisk SDCFH-512, Rev: FhCA0145, Serial #: 103420G0903J4720
Device type: ATAPI, removable
Cylinders: 993, heads: 16, sec/track: 63, total sectors: 1000944
Device capabilities:
Device supports the following standards:
ATA-9
It's just a small 512MB card, there is only a plain system for testing
purposes.
I hope this helps.
Martin
On 02/16/2016 03:47 PM, Dariusz Swiderski wrote:
On 16.02.2016, at 14:53, Martin Kukac <logout...@gmail.com> wrote:
Hello,
I hope this is the right list to post to, but I tested OpenBSD/socppc on the
RouterBoard RB600, the older non-A variant with just 64MB of RAM. It works with
no problems, I thouth it's a thing worth mentioning.
Thanks to all developers, if any of them is present here.
Hi,
This is very interesting, can you tell me what firmware you have there? and
what CF did you use for storage. I used to run into a lot
of problems with wd devices on those boards and abandoned all attempts.
greets
