Hi All I'm setting up a new email server and I'm fairly green so I just wanted someone to confirm I'm not doing anything stupid.
First I've followed the instructions from Falco here: http://www.howtoforge.com/virtual-users-and-domains-with-postfix-courier-mysql-and-squirrelmail-debian-wheezy this worked fine. it's all tested and gives the correct responses. even sends email :) I altered it slightly to forward inbound mail to offered+[code]@domain.com to a script. (Thanks to Noel for helping me to get that working.) Next I wanted to add support for DKIM. For this I followed some short instructions for postfix + amavisd-new here : http://blog.purrdeta.com/2012/06/guide-to-dkim-signing-with-amavisd-new-and-postfix/ It required a bit of hacking of the amasid config and master.cf. My problem is I'm not 100% sure it's compatible with falcon's setup. I wondered if someone could scan this and tell me if and where it's broken? I don't want to accidentally create a relay or anything else nasty. The modifications to Amavisd seemed fine so I just went with what was in the post above, however I'm not 100% certain they're in the correct files. I changed the following; 20-debian_defaults: $inet_socket_port = [10024,10026]; 25-amavisd-helpers ; ## ## Functionality required for amavis helpers like ## amavis-release. ## # Enable required AM.PDP protocol socket. # # this is incompatible with the old helpers, but one can # have multiple inet (not unix) sockets to overcome this # issue. Refer to the amavisd-new documentation for more # information $unix_socketname = "/var/lib/amavis/amavisd.sock"; $interface_policy{'SOCK'} = 'AM.PDP-SOCK'; $policy_bank{'AM.PDP-SOCK'} = { protocol => 'AM.PDP', auth_required_release => 0, # don't require secret-id for release }; #NEW policy for user with DKIM signing - not sure if this is the correct location? $interface_policy{'10026'} = 'ORIGINATING'; $policy_bank{'ORIGINATING'} = { # mail supposedly originating from our users originating => 1, # declare that mail was submitted by our smtp client allow_disclaimers => 1, # enables disclaimer insertion if available # notify administrator of locally originating malware virus_admin_maps => ["virusalert\@$mydomain"], spam_admin_maps => ["virusalert\@$mydomain"], warnbadhsender => 1, # forward to a smtpd service providing DKIM signing service forward_method => 'smtp:[127.0.0.1]:10027', # force MTA conversion to 7-bit (e.g. before DKIM signing) smtpd_discard_ehlo_keywords => ['8BITMIME'], bypass_banned_checks_maps => [1], # allow sending any file names and types terminate_dsn_on_notify_success => 0, # don’t remove NOTIFY=SUCCESS option }; 1; # ensure a defined return Then in the master.cf I have (the main change is at the bottom). Master.cf: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy submission inet n - n - - smtpd # -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o content_filter=amavis:[127.0.0.1]:10026 # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o syslog_name=postfix/smtps # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd #pickup fifo n - - 60 1 pickup pickup fifo n - - 60 1 pickup -o smtpd_tls_security_level=encrypt -o content_filter=smtp-amavis:[127.0.0.1]:10026 cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp relay unix - - - - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} parser unix - n n - - pipe user=virtual argv=/bin/bash /usr/local/bin/ssh_parser amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks 127.0.0.1:10027 inet n - n - - smtpd -o content_filter= -o smtpd_delay_reject=no -o smtpd_client_restrictions=permit_mynetworks,reject -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o smtpd_data_restrictions=reject_unauth_pipelining -o smtpd_end_of_data_restrictions= -o smtpd_restriction_classes= -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o smtpd_client_connection_count_limit=0 -o smtpd_client_connection_rate_limit=0 -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_milters -o local_header_rewrite_clients= Any thought greatly received. Please ask if I need to send more files. Thanks Mark.
