On Mon, Aug 21, 2017 at 11:14:48AM +1000, Jonathan Gray wrote:
> On Mon, Aug 21, 2017 at 12:53:15AM +0300, Artturi Alm wrote:
> > Hi,
> >
> > this + sysutils/atf-allwinner produced binaries i successfully used to
> > install arm64 for pine64-plus into mmc sd0 w/axen0 on usb, thanks :)
> > the .dtb i used in miniroot was from current dtb-4.12 pkg.
> >
> > -Artturi
>
> u-boot.itb/u-boot-sunxi-with-spl.bin includes dtbs.
>
> /dts-v1/;
>
> / {
> description = "Configuration to load ATF before U-Boot";
> #address-cells = <1>;
>
> images {
> uboot@1 {
> description = "U-Boot (64-bit)";
> data = /incbin/("u-boot-nodtb.bin");
> type = "standalone";
> arch = "arm64";
> compression = "none";
> load = <0x4a000000>;
> };
> atf@1 {
> description = "ARM Trusted Firmware";
> data =
> /incbin/("/usr/local/share/atf-allwinner/bl31.bin");
> type = "firmware";
> arch = "arm64";
> compression = "none";
> load = <0x44000>;
> entry = <0x44000>;
> };
> fdt@1 {
> description = "sun50i-a64-pine64";
> data = /incbin/("arch/arm/dts/sun50i-a64-pine64.dtb");
> type = "flat_dt";
> compression = "none";
> };
> fdt@2 {
> description = "sun50i-a64-pine64-plus";
> data =
> /incbin/("arch/arm/dts/sun50i-a64-pine64-plus.dtb");
> type = "flat_dt";
> compression = "none";
> };
> };
> configurations {
> default = "config@1";
>
> config@1 {
> description = "sun50i-a64-pine64";
> firmware = "uboot@1";
> loadables = "atf@1";
> fdt = "fdt@1";
> };
> config@2 {
> description = "sun50i-a64-pine64-plus";
> firmware = "uboot@1";
> loadables = "atf@1";
> fdt = "fdt@2";
> };
> };
> };
oh, cool, i didn't know u-boot passes it like that, i only did "fdt header"
and downloaded .dtb to memory and wrote it to sd w/fatwrite from u-boot,
but looking at "env print" now i can see it was obviously useless indeed,
and the dtb had correctly vanished after install:)
-Artturi
INFO: PSCI Affinity Map:
INFO: AffInst: Level 0, MPID 0x0, State ON
INFO: AffInst: Level 0, MPID 0x1, State OFF
INFO: AffInst: Level 0, MPID 0x2, State OFF
INFO: AffInst: Level 0, MPID 0x3, State OFF
U-Boot SPL 2017.09-rc2 (Aug 19 2017 - 15:25:54)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
NOTICE: Configuring SPC Controller
NOTICE: BL3-1: v1.0(debug):20170702
NOTICE: BL3-1: Built : 13:28:54, Aug 19 2017
NOTICE: Configuring AXP PMIC
NOTICE: PMIC: setup successful
NOTICE: SCPI: dummy stub handler, implementation level: 000000
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
U-Boot 2017.09-rc2 (Aug 19 2017 - 15:25:54 +1000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64+
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet@01c30000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
=> fdt header
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
=> bdinfo
arch_number = 0x00000000
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x40000000
-> size = 0x40000000
baudrate = 115200 bps
TLB addr = 0x7FFF0000
relocaddr = 0x7DF59000
reloc off = 0x33F59000
irq_sp = 0x79F35CC0
sp start = 0x79F35CC0
Early malloc usage: 2e0 / 400
fdt_blob = 0000000079f35cd8
=> fdt addr 0000000079f35cd8
=> fdt header
magic: 0xd00dfeed
totalsize: 0x2119 (8473)
off_dt_struct: 0x38
off_dt_strings: 0x1e58
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x2c1
size_dt_struct: 0x1e20
number mem_rsv: 0x0
=>
