On Sun, Dec 09, 2012 at 02:32:14PM +0100, Matthieu Herrb wrote:
> On Sun, Dec 09, 2012 at 02:16:21PM +0100, Stefan Sperling wrote:
> > On Sun, Dec 09, 2012 at 12:30:38PM +0000, Stuart Henderson wrote:
> > > Probably better to look around and see what more information you can find
> > > about what's happening. Describing the screen painting problem might be
> > > useful (i.e. what you do, what you see).
> >
> > I've been having problems with fonts in libreoffice lately.
> > Not sure what's causing it. Here's what it looks like:
> > http://stsp.name/images/libreoffice-fonts.jpg
> > Anyone else seeing this?
> >
>
> What hardware (graphics card & driver) are you using ?
It's an Intel Pineview GM. Full dmesg and X log below.
(Nevermind the athn debug stuff in dmesg. The kernel contains some WIP
patches for the athn, it's an unsupported chip.)
OpenBSD 5.2-current (GENERIC.MP) #351: Fri Dec 7 22:58:29 CET 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N435 @ 1.33GHz ("GenuineIntel" 686-class) 1.34 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 2134695936 (2035MB)
avail mem = 2088824832 (1992MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/21/11, BIOS32 rev. 0 @ 0xef735, SMBIOS
rev. 2.6 @ 0xe5830 (33 entries)
bios0: vendor INSYDE version "V1.15" date 10/21/2011
bios0: Packard Bell dot s
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT SSDT SSDT WDAT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S3) EXP3(S3) EXP4(S3) AZAL(S4) MODM(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N435 @ 1.33GHz ("GenuineIntel" 686-class) 1.34 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "AL10B31" serial 2883 type LION oem "SANYO"
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xda00! 0xcda00/0x1000
cpu0: Enhanced SpeedStep 1331 MHz: speeds: 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic
4 int 16, address 04:7d:7b:21:ad:9d
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732,
model 0x0008
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9485" rev 0x01: apic 4 int 17
ROM block 0: alg=3 ref=2 len=256
ROM chunk @2/6
ROM chunk @28/1
ROM chunk @32/4
ROM chunk @40/3
ROM chunk @46/3
ROM chunk @73/6
ROM chunk @106/8
ROM chunk @124/1
ROM chunk @140/4
ROM chunk @147/3
ROM chunk @153/3
ROM chunk @196/1
ROM chunk @206/20
ROM chunk @229/11
ROM chunk @243/11
ROM chunk @257/11
ROM chunk @271/11
ROM chunk @285/11
ROM chunk @299/11
ROM chunk @324/1
ROM chunk @328/9
ROM chunk @344/9
ROM chunk @356/62
found RF switch connected to GPIO pin 7
128 key cache entries
using closed loop power control
txchainmask=0x1 rxchainmask=0x1
athn0: AR9485 rev 1 (1T1R), ROM rev 0, address 74:de:2b:ee:dd:3e
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: apic 4
int 18
sdmmc0 at rtsx0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
uhci2 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200BPVT-2, 01.0> SCSI3 0/direct
fixed naa.50014ee6aca431dd
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Intenso Intenso Micro Line"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Intenso, Micro Line, 1.00> SCSI2 0/direct
removable serial.8644800b0000000004BD
sd1: 7651MB, 512 bytes/sector, 15669248 sectors
uvideo0 at uhub0 port 3 configuration 1 interface 0 "SuYin WebCam" rev
2.00/1.00 addr 3
video0 at uvideo0
rsu0 at uhub0 port 4 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00
addr 4
rsu0: MAC/BB RTL8712 cut 3, address 00:13:33:ad:0a:fc
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 304983MB, 512 bytes/sector, 624606673 sectors
root on sd2a (57cb5e42121b68d9.a) swap on sd2b dump on sd2b
[ 15.874] (--) checkDevMem: using aperture driver /dev/xf86
[ 15.913] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 15.986]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 15.987] X Protocol Version 11, Revision 0
[ 15.987] Build Operating System: OpenBSD 5.2 i386
[ 15.987] Current Operating System: OpenBSD byrne.stsp.name 5.2
GENERIC.MP#351 i386
[ 15.987] Build Date: 07 December 2012 05:39:20PM
[ 15.987]
[ 15.987] Current version of pixman: 0.28.0
[ 15.987] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.987] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.988] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 14:40:05
2012
[ 16.031] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 16.068] (==) No Layout section. Using the first Screen section.
[ 16.070] (==) No screen section available. Using defaults.
[ 16.070] (**) |-->Screen "Default Screen Section" (0)
[ 16.070] (**) | |-->Monitor "<default monitor>"
[ 16.073] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.073] (==) Disabling SIGIO handlers for input devices
[ 16.073] (==) Automatically adding devices
[ 16.073] (==) Automatically enabling devices
[ 16.270] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 16.270] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 16.270] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 16.286] (II) Loader magic: 0x3c022040
[ 16.286] (II) Module ABI versions:
[ 16.286] X.Org ANSI C Emulation: 0.4
[ 16.286] X.Org Video Driver: 12.0
[ 16.286] X.Org XInput driver : 16.0
[ 16.286] X.Org Server Extension : 6.0
[ 16.289] (--) PCI:*(0:0:2:0) 8086:a011:1025:058f rev 0, Mem @
0x96180000/524288, 0x80000000/268435456, 0x96000000/1048576, I/O @ 0x000040a0/8
[ 16.289] (--) PCI: (0:0:2:1) 8086:a012:1025:058f rev 0, Mem @
0x96100000/524288
[ 16.289] (II) LoadModule: "extmod"
[ 16.344] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 16.352] (II) Module extmod: vendor="X.Org Foundation"
[ 16.352] compiled for 1.12.3, module version = 1.0.0
[ 16.352] Module class: X.Org Server Extension
[ 16.352] ABI class: X.Org Server Extension, version 6.0
[ 16.352] (II) Loading extension MIT-SCREEN-SAVER
[ 16.352] (II) Loading extension XFree86-VidModeExtension
[ 16.352] (II) Loading extension XFree86-DGA
[ 16.354] (II) Loading extension DPMS
[ 16.355] (II) Loading extension XVideo
[ 16.360] (II) Loading extension XVideo-MotionCompensation
[ 16.360] (II) Loading extension X-Resource
[ 16.360] (II) LoadModule: "dbe"
[ 16.363] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 16.414] (II) Module dbe: vendor="X.Org Foundation"
[ 16.414] compiled for 1.12.3, module version = 1.0.0
[ 16.414] Module class: X.Org Server Extension
[ 16.414] ABI class: X.Org Server Extension, version 6.0
[ 16.415] (II) Loading extension DOUBLE-BUFFER
[ 16.415] (II) LoadModule: "glx"
[ 16.417] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 16.434] (II) Module glx: vendor="X.Org Foundation"
[ 16.434] compiled for 1.12.3, module version = 1.0.0
[ 16.434] ABI class: X.Org Server Extension, version 6.0
[ 16.436] (==) AIGLX enabled
[ 16.436] (II) Loading extension GLX
[ 16.436] (II) LoadModule: "record"
[ 16.439] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 16.444] (II) Module record: vendor="X.Org Foundation"
[ 16.444] compiled for 1.12.3, module version = 1.13.0
[ 16.444] Module class: X.Org Server Extension
[ 16.444] ABI class: X.Org Server Extension, version 6.0
[ 16.444] (II) Loading extension RECORD
[ 16.444] (II) LoadModule: "dri"
[ 16.447] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 16.483] (II) Module dri: vendor="X.Org Foundation"
[ 16.483] compiled for 1.12.3, module version = 1.0.0
[ 16.483] ABI class: X.Org Server Extension, version 6.0
[ 16.485] (II) Loading extension XFree86-DRI
[ 16.498] (II) LoadModule: "dri2"
[ 16.501] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 16.505] (II) Module dri2: vendor="X.Org Foundation"
[ 16.505] compiled for 1.12.3, module version = 1.2.0
[ 16.505] ABI class: X.Org Server Extension, version 6.0
[ 16.505] (II) Loading extension DRI2
[ 16.506] (==) Matched intel as autoconfigured driver 0
[ 16.506] (==) Matched vesa as autoconfigured driver 1
[ 16.506] (==) Assigned the driver to the xf86ConfigLayout
[ 16.506] (II) LoadModule: "intel"
[ 16.507] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 16.573] (II) Module intel: vendor="X.Org Foundation"
[ 16.573] compiled for 1.12.3, module version = 2.12.0
[ 16.574] Module class: X.Org Video Driver
[ 16.574] ABI class: X.Org Video Driver, version 12.0
[ 16.576] (II) LoadModule: "vesa"
[ 16.578] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 16.583] (II) Module vesa: vendor="X.Org Foundation"
[ 16.583] compiled for 1.12.3, module version = 2.3.2
[ 16.583] Module class: X.Org Video Driver
[ 16.583] ABI class: X.Org Video Driver, version 12.0
[ 16.583] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
Ivybridge Server (GT1), Ivybridge Server (GT2)
[ 16.584] (II) VESA: driver for VESA chipsets: vesa
[ 16.584] (WW) Falling back to old probe method for vesa
[ 16.585] (II) Loading sub module "vgahw"
[ 16.585] (II) LoadModule: "vgahw"
[ 16.594] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[ 16.620] (II) Module vgahw: vendor="X.Org Foundation"
[ 16.620] compiled for 1.12.3, module version = 0.1.0
[ 16.620] ABI class: X.Org Video Driver, version 12.0
[ 16.620] (II) Loading sub module "ramdac"
[ 16.620] (II) LoadModule: "ramdac"
[ 16.620] (II) Module "ramdac" already built-in
[ 16.621] drmOpenDevice: node name is /dev/drm0
[ 16.621] drmOpenDevice: open result is 10, (OK)
[ 16.622] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 16.622] drmOpenDevice: node name is /dev/drm0
[ 16.622] drmOpenDevice: open result is 10, (OK)
[ 16.622] drmOpenByBusid: drmOpenMinor returns 10
[ 16.622] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 16.622] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 16.622] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.622] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.622] (==) intel(0): RGB weight 888
[ 16.623] (==) intel(0): Default visual is TrueColor
[ 16.627] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 16.627] (--) intel(0): Chipset: "Pineview GM"
[ 16.627] (--) intel(0): Linear framebuffer at 0x80000000
[ 16.627] (--) intel(0): IO registers at addr 0x96180000 size 524288
[ 16.631] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 16.633] (II) intel(0): No SDVO device is found in VBT
[ 16.696] (II) intel(0): 2 display pipes available.
[ 16.696] (II) Loading sub module "ddc"
[ 16.696] (II) LoadModule: "ddc"
[ 16.696] (II) Module "ddc" already built-in
[ 16.696] (II) Loading sub module "i2c"
[ 16.696] (II) LoadModule: "i2c"
[ 16.696] (II) Module "i2c" already built-in
[ 16.699] (II) intel(0): Output VGA has no monitor section
[ 16.699] (II) intel(0): Output LVDS has no monitor section
[ 16.701] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 16.701] (II) intel(0): Attempting to determine panel fixed mode.
[ 16.703] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address
0xA0.
[ 16.707] (II) intel(0): EDID for output LVDS
[ 16.792] (II) intel(0): EDID for output VGA
[ 16.796] (II) intel(0): EDID for output LVDS
[ 16.796] (II) intel(0): Printing probed modes for output LVDS
[ 16.797] (II) intel(0): Modeline "1024x600"x60.0 49.80 1024 1072 1104
1338 600 602 608 620 (37.2 kHz P)
[ 16.797] (II) intel(0): Output VGA disconnected
[ 16.797] (II) intel(0): Output LVDS connected
[ 16.797] (II) intel(0): Using exact sizes for initial modes
[ 16.797] (II) intel(0): Output LVDS using initial mode 1024x600
[ 16.797] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 17.646] (II) intel(0): detected 1024 kB GTT.
[ 17.646] (II) intel(0): detected 8188 kB stolen memory.
[ 17.646] (==) intel(0): video overlay key set to 0x101fe
[ 17.646] (==) intel(0): DPI set to (96, 96)
[ 17.646] (II) Loading sub module "fb"
[ 17.646] (II) LoadModule: "fb"
[ 17.650] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 17.678] (II) Module fb: vendor="X.Org Foundation"
[ 17.678] compiled for 1.12.3, module version = 1.0.0
[ 17.678] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.678] (II) UnloadModule: "vesa"
[ 17.678] (II) Unloading vesa
[ 17.678] (==) Depth 24 pixmap format is 32 bpp
[ 17.681] (II) intel(0): Kernel reported 491520 total, 0 used
[ 17.681] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[ 17.683] (II) intel(0): [DRI2] Setup complete
[ 17.683] (II) intel(0): [DRI2] DRI driver: i915
[ 17.683] (**) intel(0): Framebuffer tiled
[ 17.683] (**) intel(0): Pixmaps tiled
[ 17.683] (**) intel(0): 3D buffers tiled
[ 17.683] (**) intel(0): SwapBuffers wait enabled
[ 17.690] (==) intel(0): VideoRam: 262144 KB
[ 17.691] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096,
tiled
[ 17.705] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 17.732] (II) UXA(0): Driver registered support for the following
operations:
[ 17.732] (II) solid
[ 17.732] (II) copy
[ 17.732] (II) composite (RENDER acceleration)
[ 17.732] (II) put_image
[ 17.732] (II) get_image
[ 17.732] (==) intel(0): Backing store disabled
[ 17.732] (==) intel(0): Silken mouse disabled
[ 17.739] (II) intel(0): Initializing HW Cursor
[ 18.146] (II) intel(0): Fixed memory allocation layout:
[ 18.146] (II) intel(0): 0x007ff000: end of stolen memory
[ 18.146] (II) intel(0): 0x007ff000-0x0fffffff: DRI memory manager (253956
kB)
[ 18.146] (II) intel(0): 0x10000000: end of aperture
[ 18.146] (II) intel(0): BO memory allocation layout:
[ 18.146] (II) intel(0): 0x007ff000: start of memory manager
[ 18.146] (II) intel(0): 0x00820000-0x00820fff: overlay registers (4 kB)
[ 18.146] (II) intel(0): 0x00821000-0x0082afff: HW cursors (40 kB)
[ 18.147] (II) intel(0): 0x10000000: end of memory manager
[ 18.320] is lvds
[ 18.320] (II) intel(0): using SSC reference clock of 100 MHz
[ 18.340] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 18.720] (II) intel(0): Output configuration:
[ 18.720] (II) intel(0): Pipe A is off
[ 18.720] (II) intel(0): Display plane A is now disabled and connected to
pipe A.
[ 18.720] (II) intel(0): Pipe B is on
[ 18.720] (II) intel(0): Display plane B is now enabled and connected to
pipe B.
[ 18.720] (II) intel(0): Output VGA is connected to pipe none
[ 18.720] (II) intel(0): Output LVDS is connected to pipe B
[ 18.720] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 18.748] (==) intel(0): DPMS enabled
[ 18.748] (==) intel(0): Intel XvMC decoder disabled
[ 18.751] (II) intel(0): Set up textured video
[ 18.751] (II) intel(0): Set up overlay video
[ 18.757] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.759] (--) RandR disabled
[ 18.762] (II) Initializing built-in extension Generic Event Extension
[ 18.762] (II) Initializing built-in extension SHAPE
[ 18.762] (II) Initializing built-in extension MIT-SHM
[ 18.762] (II) Initializing built-in extension XInputExtension
[ 18.762] (II) Initializing built-in extension XTEST
[ 18.762] (II) Initializing built-in extension BIG-REQUESTS
[ 18.762] (II) Initializing built-in extension SYNC
[ 18.762] (II) Initializing built-in extension XKEYBOARD
[ 18.762] (II) Initializing built-in extension XC-MISC
[ 18.762] (II) Initializing built-in extension SECURITY
[ 18.762] (II) Initializing built-in extension XINERAMA
[ 18.762] (II) Initializing built-in extension XFIXES
[ 18.762] (II) Initializing built-in extension RENDER
[ 18.762] (II) Initializing built-in extension RANDR
[ 18.763] (II) Initializing built-in extension COMPOSITE
[ 18.763] (II) Initializing built-in extension DAMAGE
[ 19.327] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.327] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.328] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19.328] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.329] (II) AIGLX: Loaded and initialized i915
[ 19.329] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.341] (II) intel(0): Setting screen physical size to 270 x 158
[ 20.846] (II) config/wscons: checking input device /dev/wskbd
[ 20.846] (II) wskbd: ignoring "user" layout
[ 20.847] (II) LoadModule: "kbd"
[ 20.851] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 20.862] (II) Module kbd: vendor="X.Org Foundation"
[ 20.862] compiled for 1.12.3, module version = 1.6.2
[ 20.862] Module class: X.Org XInput Driver
[ 20.862] ABI class: X.Org XInput driver, version 16.0
[ 20.862] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 20.862] (**) /dev/wskbd: always reports core events
[ 20.862] (**) /dev/wskbd: always reports core events
[ 20.862] (**) Option "Protocol" "standard"
[ 20.862] (**) Option "XkbRules" "base"
[ 20.862] (**) Option "XkbModel" "pc105"
[ 20.862] (**) Option "XkbLayout" "us"
[ 20.863] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 21.360] (II) config/wscons: checking input device /dev/wsmouse0
[ 21.361] (II) LoadModule: "synaptics"
[ 21.365] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 21.382] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.382] compiled for 1.12.3, module version = 1.6.2
[ 21.382] Module class: X.Org XInput Driver
[ 21.382] ABI class: X.Org XInput driver, version 16.0
[ 21.382] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 21.382] (**) /dev/wsmouse0: always reports core events
[ 21.382] (**) Option "Device" "/dev/wsmouse0"
[ 22.341] (--) synaptics: /dev/wsmouse0: x-axis range 0 - 2320 resolution 0
[ 22.341] (--) synaptics: /dev/wsmouse0: y-axis range 0 - 928 resolution 0
[ 22.341] (**) /dev/wsmouse0: always reports core events
[ 22.345] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHPAD, id 7)
[ 22.348] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant
deceleration 2.5
[ 22.348] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[ 22.348] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.080
[ 22.349] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 22.349] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 22.349] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 22.349] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 22.827] (II) config/wscons: checking input device /dev/wsmouse
[ 22.828] (II) LoadModule: "ws"
[ 22.832] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 22.839] (II) Module ws: vendor="X.Org Foundation"
[ 22.839] compiled for 1.12.3, module version = 1.3.0
[ 22.839] Module class: X.Org XInput Driver
[ 22.839] ABI class: X.Org XInput driver, version 16.0
[ 22.839] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 22.839] (**) /dev/wsmouse: always reports core events
[ 22.839] (II) ws: /dev/wsmouse: debuglevel 0
[ 22.839] (**) Option "Device" "/dev/wsmouse"
[ 22.839] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 22.839] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 22.839] (**) ws: /dev/wsmouse: associated screen: 0
[ 22.840] (II) ws: /dev/wsmouse: minimum x position: 0
[ 22.840] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 22.840] (II) ws: /dev/wsmouse: minimum y position: 0
[ 22.840] (II) ws: /dev/wsmouse: maximum y position: 599
[ 22.840] (==) ws: /dev/wsmouse: Buttons: 7
[ 22.840] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 22.840] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 22.841] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 22.841] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 22.841] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 22.841] (**) /dev/wsmouse: (accel) acceleration threshold: 4
