On Fri, Jan 09, 2009 at 10:18:41PM +0000, Stuart Henderson wrote:
> Not sure if this will help, but with the Broadcom BT-253 in the
> Eee 901, I can do this:
>
> sudo btconfig ubt0 up
> sudo btconfig ubt0 name "some name"
> sudo bthcid
> btconfig ubt0 inq
> vi /etc/bluetooth/hosts
> add address for remote device here e.g. nokia1
> sudo btpin -r -a nokia1
> this generates a temporary PIN to type into the phone to pair
> with the computer; alternatively you can use a preset PIN with
> -p instead of -r
> rfcomm_sppd -a nokia1 -s DUN
> if not already paired, the phone will ask for the PIN from above
> to allow pairing.
> AT modem commands work, ^C to exit, or you can get it to attach
> to a pty where you can run PPP
> sdpquery -a nokia1 Browse
> big long list
>
> but what I can't do is this:
>
> obexftp -b nokia1 -X -vvv
> error on connect(): Undefined error: 0
>
I get these same results on my laptop:
OpenBSD 4.4-current (GENERIC) #1650: Sat Jan 10 12:32:20 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
With the built-in bluetooth:
ubt0 at uhub3 port 1 "ALPS UGX" rev 2.00/19.15 addr 2
but, if I try this one, it still doesn't work.
ubt1 at uhub1 port 1 "Cambridge Silicon Radio Bluetooth" rev 1.10/5.25 addr 2
so, I guess it is that the bluetooth adapters I have that aren't
supported, and obexftp doesn't really work over the bluetooth I have.
l8rZ,
--
andrew - ICQ# 253198 - Jabber: [email protected]
BOFH excuse of the day: Out of cards on drive D:
