Good morning in the Lord I made port for hplip 1.6.12 (http://hplip.sf.net) integrating changes for FreeBSD's port (also adopted by NetBSD's port). Besides those changes, after experimentation I made a small (two line) change to io/hpiod/device.cpp that gives more opportunity at reading, with this change I have been able to scan with my HP PSC 1310 through the ugen driver, however I have not been able to print (I'm able to print but with the hpijs, the foomatic port of Jakob and ulpt).
My scanner was recognized by sane-find-scanner however scanimage -L reported that it didn't find a scanner, examining /var/log/messages and the sources discovered that the scanner was reported as psc_1310_series_ while there were attributes for psc_1310_series (withouth the last underscore) in /usr/local/share/hplip/data/models/models.dat repeating the section in that file with the new name solved the problem. After compiling and installing I can test with: * Restarting OpenBSD withouth ulpt (the printer/scanner will be recognized by the ugen driver). * Configuring cupsd, my /etc/cups/printers.conf includes: <Printer psc_1310> Info psc Location casa DeviceURI hp:/usb/psc_1310_series_?serial=MY43O2D1MVO2 State Idle StateTime 1167819065 Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer </Printer> * Running: sudo pkill cupsd sudo hpiod sudo /usr/local/share/hplip/hpssd.py sudo cupsd sudo scanimage > photo.pnm Well sometimes after starting cups, the printer begins to blink, I have to turn it off and restart hpiod, hpssd and cupsd. I'm also able to use hp-toolbox and other graphical tools after installing PyQT, however I have not made a port for it. Could you please help to test this port and make it better? Your suggestions are welcome. With a little of moral support I will try with the newest version of hplip. Best regards. God bless you. -- Dios, gracias por tu amor infinto. http://www.primarilypublicdomain.org/letter/ -- Vladimir Támara Patiño. http://www.geocities.com/v-tamara
hplip-port.tar.gz
Description: application/tar-gz
