On a new system with the April 12th snapshot and the current ports tree, when running kword under openbox, X core dumps. Running under fluxbox is fine.
Core file can be had here: http://www.dirtymonday.net/openbox.core dmesg follows. OpenBSD 3.9-current (GENERIC) #689: Wed Apr 12 00:22:51 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(TM) CPU 1400MHz ("GenuineIntel" 686-class) 1.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 402157568 (392732K) avail mem = 359587840 (351160K) using 4278 buffers containing 20209664 bytes (19736K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(4c) BIOS, date 01/11/02, BIOS32 rev. 0 @ 0xfb0f0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb570 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/192 (10 entries) pcibios0: PCI Exclusive IRQs: 5 11 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04 ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x04 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05 pci2 at ppb1 bus 2 ppb2 at pci2 dev 1 function 0 "DEC 21152 PCI-PCI" rev 0x03 pci3 at ppb2 bus 3 dc0 at pci3 dev 4 function 0 "DEC 21140" rev 0x22: irq 11, address 00:c0:95:e0:79:74 icsphy0 at dc0 phy 1: ICS1890 10/100 PHY, rev. 3 dc1 at pci3 dev 5 function 0 "DEC 21140" rev 0x22: irq 11, address 00:c0:95:e0:79:75 icsphy1 at dc1 phy 1: ICS1890 10/100 PHY, rev. 3 dc2 at pci3 dev 6 function 0 "DEC 21140" rev 0x22: irq 5, address 00:c0:95:e0:79:76 icsphy2 at dc2 phy 1: ICS1890 10/100 PHY, rev. 3 dc3 at pci3 dev 7 function 0 "DEC 21140" rev 0x22: irq 11, address 00:c0:95:e0:79:77 icsphy3 at dc3 phy 1: ICS1890 10/100 PHY, rev. 3 fxp0 at pci2 dev 2 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11, address 00:02:b3:28:2a:f7 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <ST340016A> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-W1210A, 1.08> SCSI0 5/cdrom removable atapiscsi1 at pciide0 channel 1 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6702B, 1007> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 11 iic0 at ichiic0 uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x05: irq 11, ICH2 AC97 ac97: codec id 0x414c4710 (Avance Logic ALC200) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff65 netmask ff65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 dc0: watchdog timeout auich0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
