Since the recent posting about why packages don't exists, got me to
thinking about the recent snapshot I installed and hit somewhat of a
wall (ie not sure how to proceed). I'm having trouble with the
bittorent type ports, and I was wondering if the list could help out:
=== BitTorrent
# cd /usr/ports/net/BitTorrent
# make install
===> Checking files for BitTorrent-4.2.2
`/usr/ports/distfiles/BitTorrent-4.2.2.tar.gz' is up to date.
>> Checksum OK for BitTorrent-4.2.2.tar.gz. (sha1)
===> BitTorrent-4.2.2 depends on: python-2.3* - not found
===> Verifying install for python-2.3* in lang/python/2.3
===> Checking files for python-2.3.5p3
`/usr/ports/distfiles/Python-2.3.5.tgz' is up to date.
>> Checksum OK for Python-2.3.5.tgz. (sha1)
===> python-2.3.5p3 depends on: tk-8.4.7 - not found
===> Verifying install for tk-8.4.7 in x11/tk/8.4
===> tk-8.4.7 uses X11, but /usr/X11R6 not found.
===> Returning to build of python-2.3.5p3
===> python-2.3.5p3 depends on: tk-8.4.7 - not found
===> Verifying install for tk-8.4.7 in x11/tk/8.4
===> tk-8.4.7 uses X11, but /usr/X11R6 not found.
===> Returning to build of python-2.3.5p3
Dependency check failed
*** Error code 1
Stop in /usr/ports/lang/python/2.3 (line 1422 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/lang/python/2.3 (line 1750 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/net/BitTorrent (line 1422 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1
Stop in /usr/ports/net/BitTorrent (line 1750 of
/usr/ports/infrastructure/mk/bsd.port.mk).
===
ok, so it is looking for X-11. Hoping there was going to be a non-x11
version, but
===
# export FLAVOR="no_x11"
# make install
Fatal: no flavors for this port. (in net/BitTorrent)
*** Error code 1
Stop.
#
===
No big deal. make search key=torrent showed me there's this ncurses
torrent client I could try:
make build for rTorrent runs fine. I ran it for the first time from
the command line it worked; for a little while then it puked on on me.
Ok, maybe I've done something wrong. So now when I try and re-run it:
=== rTorrent
# rtorrent stupid.torrent
Caught exception from libtorrent: "System call mincore failed for MemoryChunk"
#
I know I'm problably missing something obvious. (yes PF is running,
and yes, torrent ports *should* be open). PF included.
Thanks folks!
== pf.conf
# cat /etc/pf.conf
# $OpenBSD: pf.conf,v 1.31 2006/01/30 12:20:31 camield Exp $
#
# See pf.conf(5) and /usr/share/pf for syntax and examples.
# Remember to set net.inet.ip.forwarding=1 and/or net.inet6.ip6.forwarding=1
# in /etc/sysctl.conf if packets are to be forwarded between interfaces.
ext_if="rl0"
int_if="xl0"
table <spamd> persist
table <spamd-white> persist
set skip on lo
scrub in
nat-anchor "ftp-proxy/*"
rdr-anchor "ftp-proxy/*"
nat on $ext_if from !($ext_if) -> ($ext_if:0)
rdr pass on $int_if proto tcp to port ftp -> 127.0.0.1 port 8021
rdr pass on $ext_if proto tcp from <spamd> to port smtp \
-> 127.0.0.1 port spamd
rdr pass on $ext_if proto tcp from !<spamd-white> to port smtp \
-> 127.0.0.1 port spamd
anchor "ftp-proxy/*"
block in
pass out keep state
pass quick on $int_if
antispoof quick for { lo $int_if }
pass in on $ext_if proto tcp to ($ext_if) port 6881:6891 keep state
pass in on $ext_if proto tcp to ($ext_if) port ssh keep state
pass in log on $ext_if proto tcp to ($ext_if) port smtp keep state
pass out log on $ext_if proto tcp from ($ext_if) to port smtp keep state
== DMESG
# dmesg
OpenBSD 3.9-current (GENERIC) #649: Sun Mar 19 16:49:07 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 722 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536387584 (523816K)
avail mem = 482418688 (471112K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a3) BIOS, date 06/28/00, BIOS32 rev. 0 @ 0xfb380
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb808
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 34098H4>
wd0: 16-sector PIO, LBA, 39083MB, 80043264 sectors
wd1 at pciide0 channel 0 drive 1: <IBM-DTLA-307030>
wd1: 16-sector PIO, LBA, 29314MB, 60036480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL12> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: polling
iic0 at piixpm0
iic0: addr 0x2d 00=e4 01=0d 02=33 03=6b 04=3f 05=e6 06=a5 07=93 08=b4
09=7f 0a=64 0b=fb 0c=bf 0d=1c 0e=2e 0f=09 10=26 11=69 12=94 13=f8
14=6e 15=2f 16=cd 17=ed 18=a1 19=9e 1a=c7 1b=a7 1c=81 1d=fd 1e=8b
1f=21 20=69 21=5e 22=cf 23=bb 24=c3 25=dd 26=d3 27=1e 2a=93 2b=8a
2c=04 2d=65 2e=20 2f=46 30=8c 31=1a 32=30 33=a8 34=e4 35=1b 36=63
37=95 38=56 39=c2 3a=b0 3b=41 3c=50 3d=be 3e=7a 3f=29 40=01 41=dc
42=07 46=7f 47=58 48=2d 49=c0 4a=00 4b=c0 4c=c0 4d=c0 4e=7a 4f=00
50=01 51=00 52=00 56=7f 57=58 58=2d 59=c0 5a=c0 5b=c0 5c=c0 5d=c0
5e=c0 5f=00 60=69 61=5e 62=cf 63=bb 64=c3 65=dd 66=d3 67=1e 6a=93
6b=8a 6c=04 6d=65 6e=20 6f=46 70=8c 71=1a 72=30 73=a8 74=e4 75=1b
76=63 77=95 78=56 79=c2 7a=b0 7b=41 7c=50 7d=be 7e=7a 7f=29 80=e4
81=0d 82=33 83=6b 84=3f 85=e6 86=a5 87=93 88=b4 89=7f 8a=64 8b=fb
8c=bf 8d=1c 8e=2e 8f=09 90=26 91=69 92=94 93=f8 94=6e 95=2f 96=cd
97=ed 98=a1 99=9e 9a=c7 9b=a7 9c=81 9d=fd 9e=8b 9f=21 a0=69 a1=5e
a2=cf a3=bb a4=c3 a5=dd a6=d3 a7=1e aa=93 ab=8a ac=04 ad=65 ae=20
af=46 b0=8c b1=1a b2=30 b3=a8 b4=e4 b5=1b b6=63 b7=95 b8=56 b9=c2
ba=b0 bb=41 bc=50 bd=be be=7a bf=29 c0=01 c1=00 c2=00 c6=7f c7=58
c8=2d c9=c0 ca=c0 cb=c0 cc=c0 cd=c0 ce=c0 cf=00 d0=01 d1=00 d2=00
d6=7f d7=58 d8=2d d9=c0 da=c0 db=c0 dc=c0 dd=c0 de=c0 df=00 e0=69
e1=5e e2=cf e3=bb e4=c3 e5=dd e6=d3 e7=1e ea=93 eb=8a ec=04 ed=65
ee=20 ef=46 f0=8c f1=1a f2=30 f3=a8 f4=e4 f5=1b f6=63 f7=95 f8=56
f9=c2 fa=b0 fb=41 fc=50 fd=be fe=7a ff=29
xl0 at pci0 dev 13 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq
12, address 00:10:4b:70:05:15
exphy0 at xl0 phy 24: 3Com internal media interface
xl1 at pci0 dev 15 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq
10, address 00:10:4b:71:2d:d0
exphy1 at xl1 phy 24: 3Com internal media interface
rl0 at pci0 dev 17 function 0 "D-Link Systems 530TX+" rev 0x10: irq
11, address 00:05:5d:2c:f6:b1
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: LM79
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
ym0 at isapnp0 "OPL3-SA3 Sound Board, YMH0021, , " port
0x220/16,0x530/8,0x388/8,0x330/2,0x370/2 irq 5 drq 0,1
midi1 at ym0: <YM MPU-401 UART>
audio0 at ym0
joy0 at isapnp0 "OPL3-SA3 Sound Board, YMH0022, PNPB02F, " port 0x201/1
biomask ebdd netmask ffdd ttymask ffdf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
