Hello.
On all the systems where I have this installed (all jails), when issuing
"service -R", opendkim stops but does not restart.
"service milter-opendkim restart" does the job, however.
root@mail:~ # service -R
/usr/sbin/service: DEBUG: checkyesno: apache24_configcheck_disable is set to NO.
Stopping apache24.
/usr/sbin/service: DEBUG: run_rc_command: doit: kill -TERM 81005
Waiting for PIDS: 81005.
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_freshclam
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_freshclam
Stopping clamav_freshclam.
/usr/sbin/service: DEBUG: run_rc_command: doit: su -m mailnull -c 'sh -c "kill -TERM
79370"'
Waiting for PIDS: 79370.
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_clamd
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_clamd
Stopping clamav_clamd.
/usr/sbin/service: DEBUG: run_rc_command: doit: su -m mailnull -c 'sh -c "kill -TERM
76373"'
Waiting for PIDS: 76373.
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/cyrus_imapd
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/cyrus_imapd
Stopping cyrus_imapd.
/usr/sbin/service: DEBUG: run_rc_command: doit: kill -TERM 72343
Waiting for PIDS: 72343.
/usr/sbin/service: DEBUG: run_rc_command: stop_postcmd: cyrus_imapd_poststop
Stopping milteropendkim.
/usr/sbin/service: DEBUG: run_rc_command: doit: kill -TERM 84032
Waiting for PIDS: 84032.
/usr/sbin/service: DEBUG: run_rc_command: stop_postcmd: dkim_postcmd
Stopping saslauthd.
/usr/sbin/service: DEBUG: run_rc_command: doit: su -m cyrus -c 'sh -c "kill -TERM
67912"'
/usr/sbin/service: DEBUG: pid file (/var/run/saslauthd/saslauthd.pid): not
readable.
/usr/sbin/service: DEBUG: checkyesno: saslauthd_enable is set to YES.
Starting saslauthd.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon su -m cyrus -c 'sh -c
"/usr/local/sbin/saslauthd -a ldap "'
/usr/sbin/service: DEBUG: pid file (/var/run/milteropendkim/pid): not readable.
/usr/sbin/service: DEBUG: checkyesno: milteropendkim_enable is set to YES.
/usr/sbin/service: DEBUG: run_rc_command: start_precmd: dkim_prepcmd
Starting milteropendkim.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon /usr/local/sbin/opendkim -l -u mailnull:mailnull -P /var/run/milteropendkim/pid -x /usr/local/etc/mail/opendkim.conf
/usr/sbin/service: DEBUG: run_rc_command: start_postcmd: dkim_start_postcmd
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/cyrus_imapd
/usr/sbin/service: DEBUG: pid file (/var/run/cyrus-master.pid): not readable.
/usr/sbin/service: DEBUG: checkyesno: cyrus_imapd_enable is set to YES.
Starting cyrus_imapd.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon /usr/local/cyrus/libexec/master -d
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_clamd
/usr/sbin/service: DEBUG: checkyesno: clamav_clamd_enable is set to YES.
/usr/sbin/service: DEBUG: run_rc_command: start_precmd: clamav_clamd_precmd
Starting clamav_clamd.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon su -m mailnull -c 'sh
-c "/usr/local/sbin/clamd "'
/usr/sbin/service: DEBUG: Sourcing /usr/local/etc/rc.conf.d/clamav_freshclam
/usr/sbin/service: DEBUG: pid file (/var/run/clamav/freshclam.pid): not
readable.
/usr/sbin/service: DEBUG: checkyesno: clamav_freshclam_enable is set to YES.
/usr/sbin/service: DEBUG: run_rc_command: start_precmd: clamav_freshclam_precmd
Starting clamav_freshclam.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon su -m mailnull -c 'sh
-c "/usr/local/bin/freshclam --daemon -p /var/run/clamav/freshclam.pid"'
/usr/sbin/service: DEBUG: checkyesno: apache24_http_accept_enable is set to NO.
/usr/sbin/service: DEBUG: checkyesno: apache24_configcheck_disable is set to NO.
/usr/sbin/service: DEBUG: pid file (/var/run/httpd.pid): not readable.
/usr/sbin/service: DEBUG: checkyesno: apache24_enable is set to YES.
/usr/sbin/service: DEBUG: run_rc_command: start_precmd: apache24_prestart
/usr/sbin/service: DEBUG: checkyesno: apache24_configcheck_disable is set to NO.
Performing sanity check on apache24 configuration:
Syntax OK
/usr/sbin/service: DEBUG: checkyesno: apache24limits_enable is set to NO.
Starting apache24.
/usr/sbin/service: DEBUG: run_rc_command: doit: limits -C daemon /usr/local/sbin/httpd -DNOHTTPACCEPT
root@mail:~ # ps ax|grep milter
35762 1 S+J 0:00.00 grep milter
root@mail:~ # service milter-opendkim restart
/usr/local/etc/rc.d/milter-opendkim: DEBUG: pid file
(/var/run/milteropendkim/pid): not readable.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: checkyesno: milteropendkim_enable
is set to YES.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: pid file
(/var/run/milteropendkim/pid): not readable.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: checkyesno: milteropendkim_enable
is set to YES.
milteropendkim not running? (check /var/run/milteropendkim/pid).
/usr/local/etc/rc.d/milter-opendkim: DEBUG: pid file
(/var/run/milteropendkim/pid): not readable.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: checkyesno: milteropendkim_enable
is set to YES.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: run_rc_command: start_precmd: dkim_prepcmd
Starting milteropendkim.
/usr/local/etc/rc.d/milter-opendkim: DEBUG: run_rc_command: doit: limits -C daemon /usr/local/sbin/opendkim -l -u mailnull:mailnull -P /var/run/milteropendkim/pid -x /usr/local/etc/mail/opendkim.conf
/usr/local/etc/rc.d/milter-opendkim: DEBUG: run_rc_command: start_postcmd: dkim_start_postcmd
root@mail:~ # ps ax | grep milter
37977 - SsJ 0:00.00 /usr/local/sbin/opendkim -l -u mailnull:mailnull -P
/var/run/milteropendkim/pid -x /usr/local/etc/mail/opendkim.conf
38348 1 S+J 0:00.00 grep milter
Any hint about this?
I was about opening a bug report, but I thought to ask, before...
bye & Thanks
av.
