Hi all,
I have an issue with the AirPlay Bridge that I did not encounter in the
past. Devices do no longer show up in my clients after shutdown and
restart. This happens for my Denon (as in the output below), but also
for other players such as a Libratone speaker.
ONLY when I refresh the bridge from the settings page
(squeeze2raop-x86-64-static, or non-satic for that matter, doesn't make
a difference) or when I click on "Save settings" in the AirPlay Bridge
configuration, the devices reappear immediately.
Sometimes, when I fire up the soundsystem, the Denon or Libratone is
visible for a second, literally, and then it disappears again in the
player menu (I use material skin; default skin is all the same).
I worked through this forum, have fiddled about with every possible mDNS
setting, IMPG-snooping, other multicast-settings, basically every router
setting, even tried another router, bypassed the switches in my network
(after trying every setting they offer), bypassed firewalls, changed
cables ... And of course every setting in the Bridge itself, erased the
config file and began from scratch ... no joy.
The log output says something's going on with mDNSSearchCallback, but
again, I tink I really tinkered all of that. I guess it must have to do
with the brigde after all; saving settings or restarting the bridge et
voila, it works. It is only a very clumsy routine to do this for every
start of my system. Or is there a way to automate clicking the
restart-button - perhaps a json call?
When I do not 'forget' the players after its shutdown (-1 setting for
remove timeout), the players of course remain visible in the skin and
they CAN most of the time be controlled some time after a restart of the
Denon or another player. Some other times they remain silent.
I find it strange that no setting in router, switch, server or whatever
solves my problem. Maybe someone here has the brightest idea? Any help
is much appreciated!
Code:
--------------------
***unsuccessful***
[12:08:43.799709] AddRaopDevice:883 [0xbd4e40]: adding renderer
(DENON-AVR-3312)
[12:08:43.801022] raopcl_create:735 [0x7fcce40125a0]: using PCM coding
[12:08:43.806977] output_raop_thread_init:126 [0xb79800]: init output raop
[12:08:43.807094] output_init_common:290 allocating 1764000
[12:08:43.807322] mDNSsearchCallback:630 [0xbd4e40]: removing renderer
(DENON-AVR-3312)
[12:08:43.807394] slimproto_close:907 [0xb79800] slimproto stop for
DENON-AVR-3312
[12:08:43.808750] slimproto:835 squeezelite [0xb79800] <=> player [0xbd4e40]
[12:08:43.808832] slimproto:836 [0xb79800] connecting to 192.168.1.115:3483
[12:08:44.009958] DelRaopDevice:978 [0xbd4e40]: Raop device stopped
***successful***
[12:14:58.796806] AddRaopDevice:883 [0xbd4e40]: adding renderer
(DENON-AVR-3312)
[12:14:58.798611] raopcl_create:735 [0x7f32a40093b0]: using PCM coding
[12:14:58.802412] output_raop_thread_init:126 [0xb79800]: init output raop
[12:14:58.802595] output_init_common:290 allocating 1764000
[12:14:58.990224] slimproto:835 squeezelite [0xb79800] <=> player [0xbd4e40]
[12:14:58.990358] slimproto:836 [0xb79800] connecting to 192.168.1.115:3483
[12:14:58.990790] slimproto:866 [0xb79800] connected
[12:14:58.990981] sendHELO:118 [0xb79800] cap:
CanHTTPS=1,Model=squeezelite,ModelName=RaopBridge,AccuratePlayPoints=0,HasDigitalOut=1,MaxSampleRate=96000,aac,ogg,ops,ogf,flc,alc,wav,aif,pcm,mp3
[12:14:58.996306] PlayerThread:562 [0xbd4e40]: processing off
--------------------
------------------------------------------------------------------------
Tigo's Profile: http://forums.slimdevices.com/member.php?userid=72623
View this thread: http://forums.slimdevices.com/showthread.php?t=105198
_______________________________________________
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
