Hi Mac, For Globe Visibility, AFAIK, the correct details are:
Phone number: *99***1# APN: internet.globe.com.ph Also, try to remove the extra init scripts that you got from my blog entry, since those may have only been applicable to the particular modem I used which wasn't a Huawei E220. The only init script that's really important is AT+CGDCONT=1,"IP","$APN","",0,0 where $APN is your APN, or internet.globe.com.ph for Globe Visibility. Cheers! On Fri, 2008-09-19 at 15:04 +0800, mac borje wrote: > hi everyone, > > I would like to ask someone if you have the connection setting for > GLOBE Visibility on huiwe e220 usb device, I already solve my usb > issue, my modem where already detected. The only thing that I can't > connect with the following setting on wvdial.conf > > > following the setting that Mr Ronald N. Artos for PLDT weroam and the > blog for Globe visibility at http://jijo.free.net.ph/25#more I have > this seetings on wvdial.conf > > [Dialer Defaults] > Phone = *99# > Username = globe > Password = globe > APN = globe > Stupid Mode = 1 > > [Dialer weroam] > #Init1 = ATZ > #Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 > #Init3 = AT+CFUN=1;+CGDCONT=1,"IP","weroam" > Init1 = AT+CFUN=1,1 > Init2 = ATZ > Init3 = AT+CGQREQ=1,0,0,0,0,0 > Init4 = AT+CGQMIN=1,0,0,0,0,0 > Init5 = AT+CGDCONT=1,"IP","internet.globe.com.ph","",0,0 > Idle Seconds = 3000 > Baud = 921600 > Stupid Mode = 1 > Compuserve = 0 > Modem = /dev/ttyUSB0 > Auto DNS = 1 > Dial Command = ATD > Ask Password = 0 > ISDN = 0 > FlowControl = NOFLOW > > > > and with same /etc/ppp/peers/wvdial from Mr. Ronald N Artos > > > refuse-chap > refuse-mschap > refuse-mschap-v2 > refuse-eap > > plugin passwordfd.so > noauth > name wvdial > defaultroute > replacedefaultroute > noipdefault > novj > nobsdcomp > usepeerdns > updetach > modem > crtscts > lock > asyncmap 0 > lcp-echo-interval 30 > lcp-echo-failure 0 > lcp-max-configure 60 > lcp-restart 8 > ipcp-accept-local > ipcp-accept-remote > ipcp-no-address > ipcp-no-addresses > ipcp-max-configure 50 > ipcp-restart 8 > idle 6000 > noipx > novj > mtu 1456 > > > > but I haven't connect to globe have this mesage after wvdial weroam > command > > The PPP deamon has died: A Modem hung up the phone (exit code = 16) > > Thank you in advance have a nice day. > > Thank you for Mr. Ronald N Artos for providing the seeting for pldt > weroam Im still using it Thank you again. > > mac borje > > > _________________________________________________ > Philippine Linux Users' Group (PLUG) Mailing List > http://lists.linux.org.ph/mailman/listinfo/plug > Searchable Archives: http://archives.free.net.ph -- Federico Sevilla III F S 3 Consulting Inc. http://www.fs3.ph
signature.asc
Description: This is a digitally signed message part
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List http://lists.linux.org.ph/mailman/listinfo/plug Searchable Archives: http://archives.free.net.ph
