I don't have any nvme drives. The SSDs I have are sata.
Thanks for your reply. I ordered another of the same model adapter I have that works. I'll use it when it arrives.
On 6/2/24 04:13, Stephen Partington via PLUG-discuss wrote:
The pi4 has a native pcie slot and there are nvme hats that take advantage of this to mount nvme drives to this pcie bus.On Fri, May 31, 2024, 7:50 PM Jim via PLUG-discuss <plug-discuss@lists.phxlinux.org> wrote:I have a Raspberry Pi4 and I've had trouble with some adapters for some sata ssds I've tried using with it. I have several usb3 adapters that don't support uasp. When I try using one, the speeds are slow and I get lots of errors. I looked this up online and everything I saw about it said that some usb3 ssd adapters don't support uasp and a system trying to use it will get slow speeds and lots of errors. Some of the stuff I read says how to get the manufacturer and model id numbers and put them in /boot/firmware/cmdline.txt so the system will not try using uasp with those devices. In the cmdline.txt file on my Pi4, I have the following at the front of cmdline.txt: usb-storage-quirks-152d:0578:u (152d:0578 is the manufacturer and device numbers for the device in question.) This is supposed to tell the system not to use uasp on the specified device. I tried that, and rebooted the pi, but still have the problem. The only way I got it working was to plug the second drive into a usb2 port. It's a bit slower, but works. Here it told how to identify the device and how to modify cmdline.txt to tell the system not to use uasp with the device https://forums.raspberrypi.com/viewtopic.php?t=245931 The cmdline.txt file starts with usb-storage-quirks-152d:0578:u Typing lsusb identifies the device. $ lsusb Bus 002 Device 002: ID 14b0:0206 StarTech.com Ltd. Vi550 S3 This one works. The drive the pi boots from is connected to it. Bus 001 Device 003: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s This is the one I'm having trouble with. It does not work without lots of errors. I only got it working by putting it in a usb2 port. Is there any way to test whether or not a device supports uasp? Thanks for any help you can send my way. --------------------------------------------------- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss --------------------------------------------------- PLUG-discuss mailing list:PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
--------------------------------------------------- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
