hi friends,sorry for question but very important for me:
Gnome-Disk-Utility locked my disk on Secure_Erase and i can't open it because i 
don't now which password used for Secure_Erase ..?
please help me..thank you,Ahmed
---------------------------------------
Error erasing device: Error sending ATA command SECURITY SET PASSWORD: ATA 
command failed: error=0x04 count=0x00 status=0x51 (g-io-error-quark, 0)

------------------------------------------
root@mpc:/home/x# hdparm --security-disable NULL /dev/sddsecurity_password=""
/dev/sdd: Issuing SECURITY_DISABLE command, password="", user=userSG_IO: 
bad/missing sense data, sb[]:  f0 00 05 00 00 00 00 0a 00 aa 55 40 20 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00SG_IO: bad/missing sense data, 
sb[]:  f0 00 05 00 00 00 00 0a 00 aa 55 40 20 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00root@mpc:/home/x# 
----------------------------------
root@mpc:/home/x# hdparm --user-master u --security-erase PASSWORD 
/dev/sdbsecurity_password="PASSWORD"
/dev/sdb: Issuing SECURITY_ERASE command, password="PASSWORD", 
user=userSECURITY_ERASE: Input/output errorroot@mpc:/home/x# 
-----------------------------------
root@mpc:/home/x# hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media Model Number:       ST3750528AS            
                  Serial Number:      9VP5DLRX Firmware Revision:  CC49     
Transport:          SerialStandards: Used: unknown (minor revision code 0x0029) 
 Supported: 8 7 6 5  Likely used: 8Configuration: Logical max current cylinders 
16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 
  16514064 LBA    user addressable sectors:  268435455 LBA48  user addressable 
sectors: 1465140911 Logical/Physical Sector size:           512 bytes device 
size with M = 1024*1024:      715400 MBytes device size with M = 1000*1000:     
 750152 MBytes (750 GB) cache/buffer size  = unknown Nominal Media Rotation 
Rate: 7200Capabilities: LBA, IORDY(can be disabled) Standby timer values: 
spec'd by Standard, no device specific minimum R/W multiple sector transfer: 
Max = 16 Current = ? Recommended acoustic management value: 208, current value: 
128 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6       
Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4       
Cycle time: no flow control=120ns  IORDY flow control=120nsCommands/features: 
Enabled Supported:    * SMART feature set    * Security Mode feature set    * 
Power Management feature set    * Write cache    * Look-ahead    * Host 
Protected Area feature set    * WRITE_BUFFER command    * READ_BUFFER command   
 * DOWNLOAD_MICROCODE      SET_MAX security extension    * Automatic Acoustic 
Management feature set    * 48-bit Address feature set    * Device 
Configuration Overlay feature set    * Mandatory FLUSH_CACHE    * 
FLUSH_CACHE_EXT    * SMART error logging    * SMART self-test    * General 
Purpose Logging feature set    * WRITE_{DMA|MULTIPLE}_FUA_EXT    * 64-bit World 
wide name      Write-Read-Verify feature set    * {READ,WRITE}_DMA_EXT_GPL 
commands    * Segmented DOWNLOAD_MICROCODE    * Gen1 signaling speed (1.5Gb/s)  
  * Gen2 signaling speed (3.0Gb/s)    * Phy event counters    * SMART Command 
Transport (SCT) feature set    * SCT Read/Write Long (AC1), obsolete    * SCT 
Write Same (AC2)    * SCT Error Recovery Control (AC3)    * SCT Features 
Control (AC4)    * SCT Data Tables (AC5)      unknown 206[12] (vendor 
specific)Security:  Master password revision code = 65534 supported enabled 
locked  not frozen not expired: security count supported: enhanced erase 
Security level high 124min for SECURITY ERASE UNIT. 124min for ENHANCED 
SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 5000c5001ff35284 NAA : 
5 IEEE OUI : 000c50 Unique ID : 01ff35284Checksum: correctroot@mpc:/home/x# 
-------------------------------------------

_______________________________________________
Pkg-utopia-maintainers mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-utopia-maintainers

Reply via email to